CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM (http://www.cfd-online.com/Forums/openfoam/)
-   -   validation PaSR model (http://www.cfd-online.com/Forums/openfoam/67916-validation-pasr-model.html)

chbenz August 31, 2009 09:25

validation PaSR model
 
Hi,

i want to validate the partially stirred reactor model, which is implemented in OF. My idea was to set up a testcase and compare simulation vs experiment, but i can`t find a validation-case to my regret. Does anybody has an idea which case is appropriate to validate the PaSR model?

Regards,
Christof.

markusrehm September 6, 2009 23:20

Hello,

have a look at the TNF testflames discussed at the TNF workshops at

http://public.ca.sandia.gov/TNF

Regards, Markus.

chbenz September 7, 2009 03:09

Hi Markus,

i know this page, but i dont want to validate with a stady state flame. I want to simulate unsteady ignition processes in a turbulent environment. Thererfor i need an unsteady testcase. could you give me any tips?

regards,
Christof

markusrehm September 7, 2009 14:13

Hello,

in the TNF 9 Proceedings page 44 there is a table of experimental flames. Maybe that helps.

Regards, Markus.

yashar.afarin February 8, 2011 06:07

Quote:

Originally Posted by chbenz (Post 228021)
Hi,

i want to validate the partially stirred reactor model, which is implemented in OF. My idea was to set up a testcase and compare simulation vs experiment, but i can`t find a validation-case to my regret. Does anybody has an idea which case is appropriate to validate the PaSR model?

Regards,
Christof.

Hi christof

have you found any validation-case? could you validate PaSR model? what was the result?

Best Regards,

chbenz February 8, 2011 07:30

Hi,
not yet. it is still in progress. Maybe i will post some results later.

Christof


All times are GMT -4. The time now is 03:29.