|
[Sponsors] |
Interface for linking cells other than through faces |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
September 1, 2009, 04:20 |
Interface for linking cells other than through faces
|
#1 |
New Member
Louis le Grange
Join Date: Sep 2009
Posts: 9
Rep Power: 16 |
Hello,
I have an application where I want to link the temperature field in a fluid-solid porous region, i.e. linking the gas temperatures to the solid surface temperature through a user defined heat transfer coefficient. Is there currently a mechanism through which the user can create such links between different temperatures through another mechanism than faces? I have succeeded in such an application by using 'ghost faces' with zero areas (had to prevent dividing through zero here and there) and then filling in the matrix coefficients just before solution. Is there an elegant way to do this? With kind regards, Louis |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Netgen] Import netgen mesh to OpenFOAM | hsieh | OpenFOAM Meshing & Mesh Conversion | 32 | September 13, 2011 06:50 |
DecomposePar unequal number of shared faces | maka | OpenFOAM Pre-Processing | 6 | August 12, 2010 10:01 |
[blockMesh] BlockMeshmergePatchPairs | hjasak | OpenFOAM Meshing & Mesh Conversion | 11 | August 15, 2008 08:36 |
Unaligned accesses on IA64 | andre | OpenFOAM | 5 | June 23, 2008 11:37 |
physical boundary error!! | kris | Siemens | 2 | August 3, 2005 01:32 |