Electromagnetic Solver for OpenFOAM

lkh · September 9, 2009, 06:51

Hallo,

I plan to simulate electromagnetic wave propagation based on Maxwells equations. Can anybody tell me if there is a solver in OpenFOAM suitable for such problems?

Best regards
lkh

elvis · September 16, 2009, 13:57

maybe
Electromagnetics of an electric rod and surrounding air (By Margarita Sass-Tisovskaya) http://www.tfd.chalmers.se/~hani/kur.../rodSlides.pdf
http://www.tfd.chalmers.se/~hani/kur...08/rodFoam.tgz
http://www.tfd.chalmers.se/~hani/kur...odFoamCase.tgz
goes somehow in the direction you want to use OF for

elvis

krishnan_me · March 30, 2016, 21:52

Hi, I tried to run the rodFoam solver but ended up in the error as follows:
Create time

Create mesh for time = 0

Reading transportProperties

Reading field sigma

Reading field ElPot

Reading field A

Calculating magnetic field B

Calculate electrical current density Je

#0 Foam::error:

rintStack(Foam::Ostream&) at ??:?
#1 Foam::sigFpe::sigHandler(int) at ??:?
#2 ? in "/lib/x86_64-linux-gnu/libc.so.6"
#3 Foam:

ICPreconditioner::calcReciprocalD(Foam::Fie ld<double>&, Foam::lduMatrix const&) at ??:?
#4 Foam:

ICPreconditioner:

ICPreconditioner(Foam::l duMatrix::solver const&, Foam::dictionary const&) at ??:?
#5 Foam::lduMatrix:

reconditioner::addsymMatrixConst ructorToTable<Foam:

ICPreconditioner>::New(Foam:: lduMatrix::solver const&, Foam::dictionary const&) at ??:?
#6 Foam::lduMatrix:

reconditioner::New(Foam::lduMatr ix::solver const&, Foam::dictionary const&) at ??:?
#7 Foam::PCG::solve(Foam::Field<double>&, Foam::Field<double> const&, unsigned char) const at ??:?
#8 Foam::fvMatrix<double>::solveSegregated(Foam::dict ionary const&) at ??:?
#9 Foam::fvMatrix<double>::solve(Foam::dictionary const&) at ??:?
#10 Foam::SolverPerformance<double> Foam::solve<double>(Foam::tmp<Foam::fvMatrix<doubl e> > const&) at ??:?
#11 ? at ??:?
#12 __libc_start_main in "/lib/x86_64-linux-gnu/libc.so.6"
#13 ? at ??:?
Floating point exception (core dumped)

Any help in this regard is much appreciated.

Dzhordzhs · February 23, 2019, 08:54

Sooner or later someone will read this thread about "modelling electromagnetics using OpenFOAM".

My advice - if you have simple electromagnetic problem (basic geometry, single region) then you can do it!

If your problem is complex one (geometry, multi-regions) then try Elmer FEM + OpenFOAM : http://eof-library.com

_11_ · September 27, 2021, 22:44

Dzhordzhs thanks!

"Sooner or later" was about two and a half years later, but your advice was very helpful. Elmer plus OpenFoam was exactly what I needed for some capacitance design questions I've been working on.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Working directory via command line	Luiz	CFX	4	March 6, 2011 20:02
why the solver reject it? Anyone with experience?	bearcat	CFX	6	April 28, 2008 14:08
compressible two phase flow in CFX4.4	youngan	CFX	0	July 1, 2003 23:32
Setting a B.C using UserFortran in 4.3	tokai	CFX	10	July 17, 2001 16:25
Error during Solver	cfd guy	CFX	4	May 8, 2001 06:04

September 9, 2009, 06:51	Electromagnetic Solver for OpenFOAM	#1
lkh New Member Join Date: Sep 2009 Posts: 1 Rep Power: 0	Hallo, I plan to simulate electromagnetic wave propagation based on Maxwells equations. Can anybody tell me if there is a solver in OpenFOAM suitable for such problems? Best regards lkh

September 16, 2009, 13:57		#2
elvis Senior Member Elvis Join Date: Mar 2009 Location: Sindelfingen, Germany Posts: 620 Blog Entries: 6 Rep Power: 24	maybe Electromagnetics of an electric rod and surrounding air (By Margarita Sass-Tisovskaya) http://www.tfd.chalmers.se/~hani/kur.../rodSlides.pdf http://www.tfd.chalmers.se/~hani/kur...08/rodFoam.tgz http://www.tfd.chalmers.se/~hani/kur...odFoamCase.tgz goes somehow in the direction you want to use OF for elvis

March 30, 2016, 21:52		#3
krishnan_me New Member Krish Join Date: Mar 2016 Posts: 7 Rep Power: 10	Hi, I tried to run the rodFoam solver but ended up in the error as follows: Create time Create mesh for time = 0 Reading transportProperties Reading field sigma Reading field ElPot Reading field A Calculating magnetic field B Calculate electrical current density Je #0 Foam::error:rintStack(Foam::Ostream&) at ??:? #1 Foam::sigFpe::sigHandler(int) at ??:? #2 ? in "/lib/x86_64-linux-gnu/libc.so.6" #3 Foam:ICPreconditioner::calcReciprocalD(Foam::Fie ld<double>&, Foam::lduMatrix const&) at ??:? #4 Foam:ICPreconditioner:ICPreconditioner(Foam::l duMatrix::solver const&, Foam::dictionary const&) at ??:? #5 Foam::lduMatrix:reconditioner::addsymMatrixConst ructorToTable<Foam:ICPreconditioner>::New(Foam:: lduMatrix::solver const&, Foam::dictionary const&) at ??:? #6 Foam::lduMatrix:reconditioner::New(Foam::lduMatr ix::solver const&, Foam::dictionary const&) at ??:? #7 Foam::PCG::solve(Foam::Field<double>&, Foam::Field<double> const&, unsigned char) const at ??:? #8 Foam::fvMatrix<double>::solveSegregated(Foam::dict ionary const&) at ??:? #9 Foam::fvMatrix<double>::solve(Foam::dictionary const&) at ??:? #10 Foam::SolverPerformance<double> Foam::solve<double>(Foam::tmp<Foam::fvMatrix<doubl e> > const&) at ??:? #11 ? at ??:? #12 __libc_start_main in "/lib/x86_64-linux-gnu/libc.so.6" #13 ? at ??:? Floating point exception (core dumped) Any help in this regard is much appreciated.

February 23, 2019, 08:54		#4
Dzhordzhs New Member Juris Vencels Join Date: Sep 2012 Location: Riga, Latvia Posts: 15 Rep Power: 13	Sooner or later someone will read this thread about "modelling electromagnetics using OpenFOAM". My advice - if you have simple electromagnetic problem (basic geometry, single region) then you can do it! If your problem is complex one (geometry, multi-regions) then try Elmer FEM + OpenFOAM : http://eof-library.com elvis, hokhay, _11_ and 3 others like this.

September 27, 2021, 22:44	ooo	#5
_11_ New Member Join Date: Mar 2016 Posts: 2 Rep Power: 0	Dzhordzhs thanks! "Sooner or later" was about two and a half years later, but your advice was very helpful. Elmer plus OpenFoam was exactly what I needed for some capacitance design questions I've been working on.