CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM (http://www.cfd-online.com/Forums/openfoam/)
-   -   Seeking someone to model micro waterjet nozzle (http://www.cfd-online.com/Forums/openfoam/68788-seeking-someone-model-micro-waterjet-nozzle.html)

grupp October 1, 2009 15:15

Seeking someone to model micro waterjet nozzle
 
Hi,

I am working for a start-up in Silicon Valley.

We have an application with waterjets thru a 200 micron nozzle. The chamber on the water side makes a big difference to jet quality, i.e, whether a columnar jet forms at all.

I need someone to take our solidworks drawings and model the jet.

Does anyone know of someone or a company qualified to do this?

Much Thanks,
Dan

owais70 October 1, 2009 15:51

Water jet
 
Hi,

I/we can help you with the waterjet simulation with the available resources in house (OpenFOAM, custom codes, Fluent etc.). We are qualified and experienced professional in computational fluid dynamics. Our experience ranges from Aerospace, automobiles, & chemical engineering to micro fluidics.

We would like to know more about the problem at hand such as:

1. Is it a waterjet in water or waterjet jet in air.
2. Is it a high speed jet
3. The extent of domain
4. Operating conditions, etc.

Please let us (mangal.associate@gmail.com) know.

pg22 October 5, 2009 08:35

Hi Dan,

I can offer assistance with this project. I am a Mechanical Engineer with twenty years experience in nozzle design for atomization and spray applications.

The areas in which I can help include:

i) 2D/3D grid generation from 2D drawings
ii) characterisation of flow and model set-up
iii) model solution using OpenFOAM
iv) analysis of results
v) recommendations for improved designs

Please contact me directly (pgarlick@dircon.co.uk) to describe the project in more detail.


All times are GMT -4. The time now is 11:22.