CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM (http://www.cfd-online.com/Forums/openfoam/)
-   -   Problem of reconstructing pointVectorFields with parallel mesh motion (1.5.x) (http://www.cfd-online.com/Forums/openfoam/69841-problem-reconstructing-pointvectorfields-parallel-mesh-motion-1-5-x.html)

LESlie November 6, 2009 07:07

Problem of reconstructing pointVectorFields with parallel mesh motion (1.5.x)
 
Hi.

I'm having problem to reconstruct data while using moving mesh in parallel (OF 1.5.x). The motion solver I'm using is displacementLaplacian. The flow oscillators are rotating around their origins with a small oscillating angle. The error message looks like

----------------------------------------------------------------------------
Time = 1e-07

Reconstructing FV fields

Reconstructing volScalarFields

p
vDotvP
pd
d
nuEff
rho
gamma
yPlus
vDotcP
uTau

Reconstructing volVectorFields

wallShearStress
cellDisplacement
U

Reconstructing surfaceScalarFields

phi
meshPhi

Reconstructing point fields

Reconstructing pointVectorFields

pointDisplacement



size of field p0 (644) is not the same size as the patch (643)
on patch OSCILLATOR2 of field pointDisplacement in file "/c3se/users/nail/OpenFOAM/nail-1.5.x/run/Twist_Flap/processor19/1e-07/pointDisplacement"


file: /c3se/users/nail/OpenFOAM/nail-1.5.x/run/Twist_Flap/processor19/1e-07/pointDisplacement::OSCILLATOR2 from line 110075 to line 110730.

From function genericPointPatchField<Type>::genericPointPatchFie ld(const pointPatch&, const Field<Type>&, const dictionary&)
in file fields/pointPatchFields/basic/generic/genericPointPatchField.C at line 189.

FOAM exiting
----------------------------------------------------------------------------

Has anyone run into that problem also? Any suggestions? Thanks!


LESlie


All times are GMT -4. The time now is 16:31.