CFD Online Logo CFD Online URL
Home > Forums > OpenFOAM

Hidden patch for post processing in OF?

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   March 1, 2010, 02:28
Default Hidden patch for post processing in OF?
Senior Member
Eric Nutsch
Join Date: Sep 2009
Location: Eugene, Oregon USA
Posts: 112
Rep Power: 8
ericnutsch is on a distinguished road
Send a message via Skype™ to ericnutsch
I have a patch that is dividing a mesh. I want the patch to go unnoticed to OpenFOAM in the solving process. I only want to use it for post processing.

What type of patch do I use to extract values from that location but not influence the flow?

(the patch is not symmetrical by the way, and type empty makes the mesh fail via the 2D-3D empty face check)

Thanks for your help!
ericnutsch is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Using starToFoam clo OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 33 September 26, 2012 04:04
StarToFoam error Kart OpenFOAM Meshing & Mesh Conversion 1 February 4, 2010 05:38
CheckMeshbs errors ivanyao OpenFOAM Running, Solving & CFD 2 March 11, 2009 03:34
Import gmsh msh to Foam adorean Open Source Meshers: Gmsh, Netgen, CGNS, ... 24 April 27, 2005 08:19
Multicomponent fluid Andrea CFX 2 October 11, 2004 05:12

All times are GMT -4. The time now is 17:34.