|
[Sponsors] |
March 1, 2010, 02:28 |
Hidden patch for post processing in OF?
|
#1 |
Senior Member
|
I have a patch that is dividing a mesh. I want the patch to go unnoticed to OpenFOAM in the solving process. I only want to use it for post processing.
What type of patch do I use to extract values from that location but not influence the flow? (the patch is not symmetrical by the way, and type empty makes the mesh fail via the 2D-3D empty face check) Thanks for your help! |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Commercial meshers] Using starToFoam | clo | OpenFOAM Meshing & Mesh Conversion | 33 | September 26, 2012 05:04 |
[Other] StarToFoam error | Kart | OpenFOAM Meshing & Mesh Conversion | 1 | February 4, 2010 05:38 |
CheckMeshbs errors | ivanyao | OpenFOAM Running, Solving & CFD | 2 | March 11, 2009 03:34 |
[Gmsh] Import gmsh msh to Foam | adorean | OpenFOAM Meshing & Mesh Conversion | 24 | April 27, 2005 09:19 |
Multicomponent fluid | Andrea | CFX | 2 | October 11, 2004 06:12 |