CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM (http://www.cfd-online.com/Forums/openfoam/)
-   -   kivaTest tutorial-fault on temperature (engineFoam) (http://www.cfd-online.com/Forums/openfoam/73308-kivatest-tutorial-fault-temperature-enginefoam.html)

ayhan515 March 4, 2010 06:51

kivaTest tutorial-fault on temperature (engineFoam)
 
Hi all!

I'm an openfoam beginner. I used kivaTest tutorial (OpenFoam-1,5-dev on Slax). without any modification.

in combustionProperties file "ignite yes;"
Pressure is not increase but temperature is increasing continuously.

http://i50.tinypic.com/sec61l.jpg
I think pressure should have increased to about ~60 -70 bar, temperature should have increased to ~2700-2900 K after TDC decrease again. So i cant find where is problem. Please inform me about what should i do for correct work.

Thanks for your help,
Best Regards.

apoorv121 October 12, 2013 13:23

Pressure Increase
 
Rescale the pressure in paraFoam, display mode.


All times are GMT -4. The time now is 08:29.