CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM

DNS of turbulence in a channel flow

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 4, 2010, 08:40
Wink DNS of turbulence in a channel flow
  #1
New Member
 
yangliang
Join Date: Mar 2010
Posts: 2
Rep Power: 0
YANGLIANG is on a distinguished road
Now I am using channelOodes (turn off the turbulence model) to run a DNS for a channelflow problem. However, there is slightly difference (5%) compared with other DNS result. The difference might caused by the linear discretization scheme.

Now I am considering using higher order, like fourth order scheme. But how to set the numerical schemes? like interpolationSchemes,gradSchemes,divSchemes, laplacianSchemes, timeScheme, etc.

I just look into the tutorials, boxTurb16. Only the divSchemes is set to cubic(fourth order), Is there any reason for the setting?

Thank you
YANGLIANG is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
maintain a constant flow rate in channel flow ? Lewis Main CFD Forum 2 September 28, 2010 11:35
Discussion: Reason of Turbulence!! Wen Long Main CFD Forum 3 May 15, 2009 09:52
Natural convection - Inlet boundary condition max91 CFX 1 July 29, 2008 20:28
turbulent channel flow profile otto mierka Main CFD Forum 3 August 23, 2005 11:56
compressible channel flow.. R.D.Prabhu Main CFD Forum 0 July 17, 1998 17:23


All times are GMT -4. The time now is 15:30.