CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM (http://www.cfd-online.com/Forums/openfoam/)
-   -   Problem with Paraview (http://www.cfd-online.com/Forums/openfoam/73510-problem-paraview.html)

ata March 10, 2010 07:02

Problem with Paraview
 
Hi Foamers
I have a problem with paraview. When I want to save screenshot I got this message:

p, li { white-space: pre-wrap; } X Error: GLXBadContextTag 170
Extension: 153 (Uknown extension)
Minor opcode: 5 (Unknown request)
Resource id: 0x460031f


Could any one help me?
Any help will be appreciated.
Thanks
p, li { white-space: pre-wrap

olesen March 11, 2010 02:31

Quote:

Originally Posted by ata (Post 249330)
Hi Foamers
I have a problem with paraview. When I want to save screenshot I got this message:

p, li { white-space: pre-wrap; } X Error: GLXBadContextTag 170
Extension: 153 (Uknown extension)
Minor opcode: 5 (Unknown request)
Resource id: 0x460031f

For some versions of paraview it's more reliable to use an external program (eg, gimp) for screenshots. AFAIK the version in cvshead now works, but in the past I've also had problems with paraview creating corrupt PNG files.

ata March 11, 2010 03:13

Problem with Paraview
 
Hi Olesen Thank you very much for your reply.

Kate March 12, 2010 14:29

Basic question in Praview
 
Hi all,

actually I could not open a new thread, so I post my question in this related thread.
I have a very basic question, I was successful to upload my data in a vtk format, but I do not know which bottom in paraview shows the plot??
wishes
Kate

ata March 12, 2010 23:26

Problem with Paraview
 
Hi cathren
1. For new thread go to:
http://www.cfd-online.com/Forums/openfoam/
2. For plotting dependent of what kind of plotting use different filters in paraview. For more details refer to users guide pdf file.
Best regards

Kate March 13, 2010 12:23

Quote:

Originally Posted by ata (Post 249779)
Hi cathren
1. For new thread go to:
http://www.cfd-online.com/Forums/openfoam/

I've done this thanks,
Quote:

Originally Posted by ata (Post 249779)
2. For plotting dependent of what kind of plotting use different filters in paraview. For more details refer to users guide pdf file.
Best regards

would be possible to attach me this file, actually my question seems to be basic, I was successful to upload my data file in paraview, I pressed accept buttom, but it does not show any plot, how can I change the setting for the parameters to suit my data file

ata March 15, 2010 08:42

Problem with Paraview
 
Hi kate
Now in my country, is vacations and i have not high speed internet (now I am using dial up internet connection). So I can't send you that file. But if you install standard version of OpenFOAM pdf file is in doc folder. There is an important topic. Some versions of paraview don't work properly. Although in Linux Always it works correctly but I think may be your paraview did not install properly.
However I'll send that file for you as soon as possible.
Best regards

Ata

Kate March 15, 2010 09:02

thanks, I have downloaded the user guide, now I am able to plot my data using paraview 3.6.2 on a unix platform, just a small question, how can I sav ethe plot in the display area as eps or ps file , actaully I followed the steps mentioned in the userguide
PHP Code:

  11 Copy and Print
11.1 Overview
Depending on which platform you are using
ParaView may include a copy image
operation 
and printing functionalityThe copy image option is supported only on the
Windows platform
Printing is fully supported on WindowsOn Linux Unixthe print
functionality will generate a postscript file that you must send to your printer.
      
On Linux Unix a file saving dialog will pop up allowing you to specify the
location 
and name of a postscript file into which the image will be writtenOn Linux /
Unix you will have to send this image to the printer

the problem I could not find the print option under the file menu.

wishes
Kate

ata March 16, 2010 02:02

Hi Kate
I can not solve your problem but for your information, my paraview also has not print option in it's file menu.
Best regards

ata March 16, 2010 02:07

Problem with Paraview
 
Hi Kate
I can not solve your problem but for your information, my paraview also has not print option in it's file menu.
Best regards

baburaj August 6, 2011 03:21

CFD Electro chemical machining problem
 
I am doing my project in in ANSYS CFD, my friend wrote a UDF program for heat generation but it shown some error like function expect void format.This is our program
#include"udf.h"
DEFINE_SOURCE(heatgeneration,c,t,ds,eqn)
{
real temp;
real source;
temp=C_T(c,t);
source=(j*j)/{20(0.02*temp-5)};
return (source);
}
j is the current density.
If any body know about this problem please send the details in to mail baburajaty@gmail.com.


All times are GMT -4. The time now is 08:03.