[Other] Salome Meshing

seanmike31 · August 5, 2015, 16:52

Hello everyone, I want to mesh the cavities of my system and not the system structure but the fluid.

I tried to used different solvers of Salome but what I understood is that I'm missing some license.

If somebody can tell me if it's possible to mesh cavities or an another Opensource software to mesh my model.

Thanks.

chriss85 · August 6, 2015, 06:17

Why not use snappyHexMesh?
Another good alternative would be cfMesh.
Salome supports multiple meshing algorithms, some of which are commercial.

seanmike31 · August 6, 2015, 16:58

Thanks I will try snappyHexMesh this weekend

tareqkh · August 8, 2015, 00:09

I would suggest you using Gmsh. Properly is a lot easier in your case than using SnappyHexMesh.

Best,

August 8, 2015, 00:09	Hey	#4
tareqkh Senior Member CFD Join Date: Nov 2010 Location: United States Posts: 243 Rep Power: 16	I would suggest you using Gmsh. Properly is a lot easier in your case than using SnappyHexMesh. Best,

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ANSYS Meshing] Icem meshing queries	Mfaizan	ANSYS Meshing & Geometry	21	July 30, 2015 23:10
[ICEM] Flow channel meshing problems	StefanG	ANSYS Meshing & Geometry	19	May 15, 2012 06:44
[ANSYS Meshing] Meshing strategy for External Flows	Hybrid	ANSYS Meshing & Geometry	0	January 24, 2012 14:27
Best Meshing scheme for Cylinder	Nutrex	Main CFD Forum	4	July 29, 2008 11:03
Volume Meshing & Face Meshing? singularity of grid	ken	FLUENT	0	September 4, 2003 11:08

August 6, 2015, 06:17		#2
chriss85 Senior Member Join Date: Oct 2013 Posts: 397 Rep Power: 18	Why not use snappyHexMesh? Another good alternative would be cfMesh. Salome supports multiple meshing algorithms, some of which are commercial.

August 6, 2015, 16:58		#3
seanmike31 New Member Join Date: Mar 2015 Posts: 10 Rep Power: 11	Thanks I will try snappyHexMesh this weekend