CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM

Turbulent premixed combustion error... XiFoam model

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 21, 2010, 08:57
Default Turbulent premixed combustion error... XiFoam model
  #1
Member
 
achinta
Join Date: May 2010
Location: Sydney
Posts: 66
Rep Power: 7
achinta is on a distinguished road
Hi,
I am using XiFoam to simulate turbulent premixed combustion. I got the following error. Could somebody help in finding the cause of this error?
************************************************** *******
[0] attempt to use janafThermo<equationOfState> out of temperature range 100 -> 5000; T = -30.7508#0 Foam::error:rintStack(Foam::Ostream&) in "/usr/logau/expsm/OpenFOAM/OpenFOAM-1.6/lib/linux64GccDPOpt/libOpenFOAM.so"
#1 Foam::error::abort() in "/usr/logau/expsm/OpenFOAM/OpenFOAM-1.6/lib/linux64GccDPOpt/libOpenFOAM.so"
#2 Foam::specieThermo<Foam::janafThermo<Foam:erfect Gas> >::H(double) const in "/usr/logau/expsm/OpenFOAM/OpenFOAM-1.6/lib/linux64GccDPOpt/libbasicThermophysicalModels.so"
#3 Foam::specieThermo<Foam::janafThermo<Foam:erfect Gas> >::TH(double, double) const in "/usr/logau/expsm/OpenFOAM/OpenFOAM-1.6/lib/linux64GccDPOpt/libreactionThermophysicalModels.so"
#4 Foam::hhuMixtureThermo<Foam::homogeneousMixture<Fo am::sutherlandTransport<Foam::specieThermo<Foam::j anafThermo<Foam:erfectGas> > > > >::calculate() in "/usr/logau/expsm/OpenFOAM/OpenFOAM-1.6/lib/linux64GccDPOpt/libreactionThermophysicalModels.so"
#5 Foam::hhuMixtureThermo<Foam::homogeneousMixture<Fo am::sutherlandTransport<Foam::specieThermo<Foam::j anafThermo<Foam:erfectGas> > > > >::correct() in "/usr/logau/expsm/OpenFOAM/OpenFOAM-1.6/lib/linux64GccDPOpt/libreactionThermophysicalModels.so"
#6 main in "/usr/logau/expsm/OpenFOAM/OpenFOAM-1.6/applications/bin/linux64GccDPOpt/XiFoam"
#7 __libc_start_main in "/lib64/libc.so.6"
#8 _start at /usr/src/packages/BUILD/glibc-2.9/csu/../sysdeps/x86_64/elf/start.S:116
[0]
[0]
[0] From function janafThermo<equationOfState>::checkT(const scalar T) const
[0] in file /home/dm2/henry/OpenFOAM/OpenFOAM-1.6/src/thermophysicalModels/specie/lnInclude/janafThermoI.H at line 64.
[0]
FOAM parallel run aborting
[0]
--------------------------------------------------------------------------
MPI_ABORT was invoked on rank 0 in communicator MPI_COMM_WORLD
with errorcode 1.

NOTE: invoking MPI_ABORT causes Open MPI to kill all MPI processes.
You may or may not see output from other processes, depending on
exactly when Open MPI kills them.
************************************************** **********

Thank you

Regards,
Achinta
achinta is offline   Reply With Quote

Old   June 23, 2010, 05:45
Default
  #2
New Member
 
carlo
Join Date: Jun 2010
Posts: 4
Rep Power: 7
combustione is on a distinguished road
unfortunately i cannot help you, but i must ask you an help: i'm trying to modelling a premixed combustion but i'm not able to set the reactant, i've seen that is possible only to set the material, but it can't be the corret way to set the reactant because in this way is impossible to set a mixture.
please if you can, help me
combustione is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Combustion model for CAI/HCCI in AVL FIRE stoodent Main CFD Forum 0 July 19, 2009 18:37
The problem of UDF in Non premixed combustion model zhangyuan Main CFD Forum 0 May 25, 2009 09:41
turbulent combustion palani kumar FLUENT 0 October 15, 2007 14:26
How can I model H2-AIR combustion popi CFX 8 August 16, 2007 05:32
Need Similar Combustion Tutorial as my model Arnab CD-adapco 0 May 24, 2005 18:23


All times are GMT -4. The time now is 01:36.