Problem compiling OpenFoamTurbo

troy · July 8, 2010, 13:35

Hello,
I'm having a horrible time trying to compliling OpenFoamTurbo. I have followed the directions on http://openfoamwiki.net/index.php/Si..._OpenFoamTurbo to no avail. It first complained about the parts of the Make files that had lines that had been tried to be commented out that it was trying to read. I deleted all those lines (they had to do with rotating pressure, split velocity, and temperature) to get the basic rotating reference frame module, and it still won't compile. Now it says

finiteVolume/cfdTools/general/SRFZones/SRFZone.C: In member function ‘void Foam::SRFZone::addCoriolis(Foam::fvVectorMatrix&) const’:
finiteVolume/cfdTools/general/SRFZones/SRFZone.C:97: error: request for member ‘db’ is ambiguous
/home/tmiller/OpenFOAM/OpenFOAM-1.7.0/src/OpenFOAM/lnInclude/IOobject.H:235: error: candidates are: const Foam:

bjectRegistry& Foam::IOobject::db() const

I thought it might be having trouble finding all the #include files. Could that be the issue?

Troy

hani · July 11, 2010, 13:08

Hi Troy,

It seems like you are using OpenFOAM-1.7.0. Is that so?

In the instructions of OpenFOAM Turbo, you can see that versions 1.4.1 and 1.5 are mentioned. I'm quite sure that some modifications are necessary for it to work with 1.7.0.

Håkan

troy · July 12, 2010, 10:08

Yes, I'm attempting to use OpenFOAM-1.7.0. Thank you for your insight about using the Turbo 1.5 level. I'm giving up for now. I need to to do 3D-high speed turbo work with imported geometries, and that seems to be above the level of where OpenFOAM has been developed to this point. If I were more of a CFD and coding guru, I might jump at the challenge, but it is too overwhelming for the amount of time I have to do this.

anthony761 · December 4, 2020, 14:08

Hello,

I'm trying to do the same thing, compiling OpenFoamTurbo Library with foam-extend-4.1.
I realized that I can't because the last version of OpenFoamTurbo is only compatible with OpenFoam 2.0 according to http://openfoamwiki.net/index.php/Si..._OpenFoamTurbo. Then I tried to install and to compile OpenFoam 2.0 on Ubuntu 20.04 following the instructions on https://openfoamwiki.net/index.php/I...M-2.0.0/Ubuntu but it dosen't work. I can't install gcc-4.4 and g++-4.4 because they are not available anymore... So, how can I do?.

Is there any plan to include directly OpenFoamTurbo library to the foam-extend?

Thank you for your help

July 8, 2010, 13:35	Problem compiling OpenFoamTurbo	#1
troy New Member Troy Join Date: Jul 2010 Posts: 6 Rep Power: 15	Hello, I'm having a horrible time trying to compliling OpenFoamTurbo. I have followed the directions on http://openfoamwiki.net/index.php/Si..._OpenFoamTurbo to no avail. It first complained about the parts of the Make files that had lines that had been tried to be commented out that it was trying to read. I deleted all those lines (they had to do with rotating pressure, split velocity, and temperature) to get the basic rotating reference frame module, and it still won't compile. Now it says finiteVolume/cfdTools/general/SRFZones/SRFZone.C: In member function ‘void Foam::SRFZone::addCoriolis(Foam::fvVectorMatrix&) const’: finiteVolume/cfdTools/general/SRFZones/SRFZone.C:97: error: request for member ‘db’ is ambiguous /home/tmiller/OpenFOAM/OpenFOAM-1.7.0/src/OpenFOAM/lnInclude/IOobject.H:235: error: candidates are: const Foam:bjectRegistry& Foam::IOobject::db() const I thought it might be having trouble finding all the #include files. Could that be the issue? Troy Kummi likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
natural convection problem for a CHT problem	Se-Hee	CFX	2	June 10, 2007 06:29
Adiabatic and Rotating wall (Convection problem)	ParodDav	CFX	5	April 29, 2007 19:13
COMPILING PROBLEM	ammi	FLUENT	1	December 7, 2006 04:07
problem in compiling UDF	ammi reddy	FLUENT	1	December 1, 2006 06:45
UDF compiling problem in Windows	Mazyar	FLUENT	1	April 26, 2006 01:48

July 11, 2010, 13:08		#2
hani Senior Member Håkan Nilsson Join Date: Mar 2009 Location: Gothenburg, Sweden Posts: 204 Rep Power: 18	Hi Troy, It seems like you are using OpenFOAM-1.7.0. Is that so? In the instructions of OpenFOAM Turbo, you can see that versions 1.4.1 and 1.5 are mentioned. I'm quite sure that some modifications are necessary for it to work with 1.7.0. Håkan

July 12, 2010, 10:08		#3
troy New Member Troy Join Date: Jul 2010 Posts: 6 Rep Power: 15	Yes, I'm attempting to use OpenFOAM-1.7.0. Thank you for your insight about using the Turbo 1.5 level. I'm giving up for now. I need to to do 3D-high speed turbo work with imported geometries, and that seems to be above the level of where OpenFOAM has been developed to this point. If I were more of a CFD and coding guru, I might jump at the challenge, but it is too overwhelming for the amount of time I have to do this.

December 4, 2020, 14:08		#4
anthony761 New Member Join Date: Oct 2019 Posts: 13 Rep Power: 6	Hello, I'm trying to do the same thing, compiling OpenFoamTurbo Library with foam-extend-4.1. I realized that I can't because the last version of OpenFoamTurbo is only compatible with OpenFoam 2.0 according to http://openfoamwiki.net/index.php/Si..._OpenFoamTurbo. Then I tried to install and to compile OpenFoam 2.0 on Ubuntu 20.04 following the instructions on https://openfoamwiki.net/index.php/I...M-2.0.0/Ubuntu but it dosen't work. I can't install gcc-4.4 and g++-4.4 because they are not available anymore... So, how can I do?. Is there any plan to include directly OpenFoamTurbo library to the foam-extend? Thank you for your help