CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM

Ring / Donut GGI Rotor Mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 17, 2010, 18:54
Default Ring / Donut GGI Rotor Mesh
  #1
Senior Member
 
Robert
Join Date: Sep 2010
Posts: 154
Rep Power: 6
lordvon is on a distinguished road
Hello foamers,
Let's say we have a VAWT, and we are interested only in 2D. Instead of the cylindrical rotor mesh as seen in the mixerGgi tutorial, how would a ring / donut shaped rotor mesh compare in computational load and accuracy? There would then be one rotor mesh with two, unconnected GGI faces on it, and two stator meshes, one like the mixerGgi stator and the other enclosed within the rotor mesh. What do you guys think?

(If you could get away with only needing one physical grouping for both sliding faces, which is really what I mean to ask as well.)

Last edited by lordvon; September 18, 2010 at 12:37.
lordvon is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Difference between ggi and overlapGgi? GGI Tips and Tricks? philippose OpenFOAM Running, Solving & CFD 7 January 16, 2013 10:40
Floating point exception error Alan OpenFOAM Running, Solving & CFD 10 April 6, 2012 14:02
GGI in OpenFOAM-1.5-dev philippose OpenFOAM Running, Solving & CFD 14 November 13, 2011 15:55
Problem using GGI besto OpenFOAM 13 October 30, 2010 07:34
BCs for parallel ggi NickG OpenFOAM 1 March 15, 2010 12:12


All times are GMT -4. The time now is 21:45.