CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM (http://www.cfd-online.com/Forums/openfoam/)
-   -   dsmcFoam modified version download (http://www.cfd-online.com/Forums/openfoam/82197-dsmcfoam-modified-version-download.html)

Marta November 19, 2010 07:51

dsmcFoam modified version download
 
Hi All!

I have implemented a new version of dsmcFoam where it is possible to initialise the particles where desired inside the domain under study and to simulate a pressure-driven flow of particles. I implemented the changes to the code for initialisation and Claus Schmitzer implemented those about the flow modelling.
The way everything works is briefly discussed in the document 'dsmcFoamModifications'. The procedure for compiling is explained there, together with a list of the modified classes.

Finally, you can find an example test case, which you can use to see how to apply the modifications to your own analysis and also some movies of the results I obtained.

If you want to have the new code version, then you can contact me directly because it's impossible to attach it here.

Cheers!

Marta

Marta November 19, 2010 07:56

I am sorry, but it is impossible to post here also the pdf file describing the implementation and the compiling procedure, so again, contact me directly if you want this version of the code.

Marta

phsieh2005 November 19, 2010 09:58

Hi, Marta,

I am interested. Could you please email me the code and the pdf file? Thanks!

Pei
phsieh2005@yahoo.com

mksingh November 19, 2010 16:49

Dear Marta,
Could you please send me the code and pdf to my gmail id:
mrityunjay111@gmail.com
Thanks in advance.
M K

C.Gleason.G October 15, 2012 07:26

Hi Marta,

I am really interested on your modification of the DSMC Foam code. Could you please email me your code & the PDF file to the following E-mail address:

gleason_cristian@yahoo.com.mx

Thanks in advance

Cristian

wenjie January 7, 2013 11:17

Hi, could you please also send me copy? My email is W.JIN-1@tudelft.nl. I am really interested. Thanks a lot!

ethan oh January 8, 2013 01:28

Hi Marta,

I am interested on your modification of the DSMC Foam code. Could you please send me your code & the PDF file to the following E-mail address:

bibento@naver.com

Thanks in advance

Ethan

murali February 20, 2013 06:22

new dsmc code
 
Quote:

Originally Posted by Marta (Post 284090)
Hi All!

I have implemented a new version of dsmcFoam where it is possible to initialise the particles where desired inside the domain under study and to simulate a pressure-driven flow of particles. I implemented the changes to the code for initialisation and Claus Schmitzer implemented those about the flow modelling.
The way everything works is briefly discussed in the document 'dsmcFoamModifications'. The procedure for compiling is explained there, together with a list of the modified classes.

Finally, you can find an example test case, which you can use to see how to apply the modifications to your own analysis and also some movies of the results I obtained.

If you want to have the new code version, then you can contact me directly because it's impossible to attach it here.

Cheers!

Marta

i am very much interested in new modified dsmc code

muraliraja865@yahoo.com


thanking you

alalai May 9, 2013 09:22

it has been included in openfoam

NewbieKorea May 30, 2013 00:41

Hi,
That's great news! Could you plz send the files to my email

sreyasmary@gmail.com

Thanks in advance

elfuertes June 14, 2013 05:55

Hello Marta !

I am interested in the modification you added to dsmcFoam.
Could you please send the code and the .pdf at my e-mail address ?

sylvain.fuertes@gmail.com

Thanks in advance,

Sylvain

hhy September 16, 2013 23:49

Hello Marta !

I am interested in the modification you added to dsmcFoam.
Could you please send the code and the .pdf at my e-mail address ?

scuhhy@gmail.com

Thanks in advance,

believe December 17, 2013 07:02

dsmcModFoam
 
Hi, Marta,
I am interested in dsmcModFoam and downloaded it in www.physimmasters.com ,but i can not run it succesful. maybe there are some setting errors in contorlDict, i don not know how to solve it. can you give me a case file including 0 , constant, system folder using dsmcModFoam . thank you very much! my e-mail address believesds@gmail.com hoping for your reply.


All times are GMT -4. The time now is 10:35.