dsmcFoam modified version download
Hi All!
I have implemented a new version of dsmcFoam where it is possible to initialise the particles where desired inside the domain under study and to simulate a pressure-driven flow of particles. I implemented the changes to the code for initialisation and Claus Schmitzer implemented those about the flow modelling. The way everything works is briefly discussed in the document 'dsmcFoamModifications'. The procedure for compiling is explained there, together with a list of the modified classes. Finally, you can find an example test case, which you can use to see how to apply the modifications to your own analysis and also some movies of the results I obtained. If you want to have the new code version, then you can contact me directly because it's impossible to attach it here. Cheers! Marta |
I am sorry, but it is impossible to post here also the pdf file describing the implementation and the compiling procedure, so again, contact me directly if you want this version of the code.
Marta |
Hi, Marta,
I am interested. Could you please email me the code and the pdf file? Thanks! Pei phsieh2005@yahoo.com |
Dear Marta,
Could you please send me the code and pdf to my gmail id: mrityunjay111@gmail.com Thanks in advance. M K |
Hi Marta,
I am really interested on your modification of the DSMC Foam code. Could you please email me your code & the PDF file to the following E-mail address: gleason_cristian@yahoo.com.mx Thanks in advance Cristian |
Hi, could you please also send me copy? My email is W.JIN-1@tudelft.nl. I am really interested. Thanks a lot!
|
Hi Marta,
I am interested on your modification of the DSMC Foam code. Could you please send me your code & the PDF file to the following E-mail address: bibento@naver.com Thanks in advance Ethan |
new dsmc code
Quote:
muraliraja865@yahoo.com thanking you |
it has been included in openfoam
|
Hi,
That's great news! Could you plz send the files to my email sreyasmary@gmail.com Thanks in advance |
Hello Marta !
I am interested in the modification you added to dsmcFoam. Could you please send the code and the .pdf at my e-mail address ? sylvain.fuertes@gmail.com Thanks in advance, Sylvain |
Hello Marta !
I am interested in the modification you added to dsmcFoam. Could you please send the code and the .pdf at my e-mail address ? scuhhy@gmail.com Thanks in advance, |
dsmcModFoam
Hi, Marta,
I am interested in dsmcModFoam and downloaded it in www.physimmasters.com ,but i can not run it succesful. maybe there are some setting errors in contorlDict, i don not know how to solve it. can you give me a case file including 0 , constant, system folder using dsmcModFoam . thank you very much! my e-mail address believesds@gmail.com hoping for your reply. |
please help me
Dear Marta,
Could you please send me the code and pdf to my mail id: christantos@mie.uth.gr Thanks in advance. C. T. Quote:
|
requesting code and pdf
Quote:
Could you please send me the code and pdf to my email: rahaieee@yahoo.com Thanks in advance. R. R. |
Hello Marta,
I am interested in performing pressure driven DSMC simulation. I could not find a link to download the file from http://www.physimmasters.com/. Could you please e-mail me the code and PDF @ nadishsaini@gmail.com. Thank you very much. |
I am doing experiments in rarefied gas dynamics. Can you send the modified pressure driven code and manuals to do a parametric study. Because doing experiment n large manner is very expensive..
Regards Sreelal |
could you please send me the code and pdf, my email id is sheshdhurandhar@gmail.com.
Thank you in advance. |
Could you please mail the modified code to AkshayMAnvekar@gmail.com.
Thanks |
Hi,
may I ask for the modified code and the pdf as well? My email address is tomas.tisovsky@tul.cz Thank you in advance. |
I am also interested in the dsmcModFoam code. Could you please mail me loddadadon@gmx.de
Best regards Lodda |
I am very interested in the dsmcModFoam code. Could you please mail me 13212104675@163.com
Best regards Lyan |
Quote:
Hi Marta, Would you share this updated version to me? freuen@gmail.com Sent from my iPhone using CFD Online Forum mobile app |
dsmcmodfoam request
Hi Marta,
I'm really interested in looking at your code if that's still a possibility. My e-mail address is thomas.f.flint@gmail.com Thanks in advance, Tom |
Request for dsmcModFoam
Hi Marta,
I am also very interested to take a look at dsmcModFoam. Could you please send me the files to the following email adress? robhahn20@gmx.de Thanks in advance! |
Hello
I'm a undergrad student of Bangladesh University of Engineering and Technology and my thesis topic is pressure driven flow in dsmcFoam. Would you please send me the codes for pressure driven flow in cd nozzle in dsmcFoam. I will really be grateful for this. Thanks in advance. mail: marufikram100@gmail.com With regards Maruf Md. Ikram Bangladesh |
Pressure driven flow in dsmcFoam
Hello
I'm a undergrad student of Bangladesh University of Engineering and Technology and my thesis topic is pressure driven flow in dsmcFoam. Would anyone of you please send me the codes for pressure driven flow in dsmcFoam. I will really be grateful for this. Thanks in advance. mail: marufikram100@gmail.com With regards Maruf Md. Ikram Bangladesh |
Hi, Marta,
I am interested. Could you please email me the code and the pdf file? Thanks! MO 903182911@qq.com |
All times are GMT -4. The time now is 04:44. |