[lobna0]

Hello ! I am a beginner to CFD and OpenFOAM and i am trying to simulate a compressible turbulent flow around a nosecone using k-omega sst model. The mesh seems fine so far but I keep getting this error:
what could be the problem? i thought the fvschemes or the mesh but they're alright. It could be the BCs but idk how they're supposed to be

Courant Number mean: 0.0628207 max: 16.2687
Time = 0.272

diagonal:  Solving for rho, Initial residual = 0, Final residual = 0, No Iterations 0
DILUPBiCGStab:  Solving for Ux, Initial residual = 0.00451932, Final residual = 1.11491e-07, No Iterations 1
DILUPBiCGStab:  Solving for Uy, Initial residual = 0.0449108, Final residual = 1.94405e-07, No Iterations 2
DILUPBiCGStab:  Solving for Uz, Initial residual = 0.0442522, Final residual = 1.71598e-07, No Iterations 2
DILUPBiCGStab:  Solving for e, Initial residual = 0.00566152, Final residual = 1.68479e-07, No Iterations 1
[0] #0  Foam::error::printStack(Foam::Ostream&) at ??:?
[0] #1  Foam::sigFpe::sigHandler(int) at ??:?
[0] #2  ? in "/lib64/libc.so.6"
[0] #3  Foam::hePsiThermo<Foam::psiThermo, Foam::pureMixture<Foam::sutherlandTransport<Foam::species::thermo<Foam::hConstThermo<Foam::perfectGas<Foam::specie> >, Foam::sensibleInternalEnergy> > > >::calculate() at ??:?
[0] #4  Foam::hePsiThermo<Foam::psiThermo, Foam::pureMixture<Foam::sutherlandTransport<Foam::species::thermo<Foam::hConstThermo<Foam::perfectGas<Foam::specie> >, Foam::sensibleInternalEnergy> > > >::correct() at ??:?
[0] #5  ? at ??:?
[0] #6  __libc_start_main in "/lib64/libc.so.6"
[0] #7  ?[yato212:112509] *** Process received signal ***
[yato212:112509] Signal: Floating point exception (8)
[yato212:112509] Signal code:  (-6)
[yato212:112509] Failing at address: 0x3ea0001b77d
 at ??:?
[yato212:112509] [ 0] /lib64/libc.so.6(+0x36340)[0x7fa303fe1340]
[yato212:112509] [ 1] /lib64/libc.so.6(gsignal+0x37)[0x7fa303fe12c7]
[yato212:112509] [ 2] /lib64/libc.so.6(+0x36340)[0x7fa303fe1340]
[yato212:112509] [ 3] /home/yato/OpenFOAM-6/platforms/linux64GccDPInt32Opt/lib/libfluidThermophysicalModels.so(_ZN4Foam11hePsiThermoINS_9psiThermoENS_11pureMixtureINS_19sutherlandTransportINS_7species6thermoINS_12hConstThermoINS_10perfectGasINS_6specieEEEEENS_22sensibleInternalEnergyEEEEEEEE9calculateEv+0x186)[0x7fa30a48fe56]
[yato212:112509] [ 4] /home/yato/OpenFOAM-6/platforms/linux64GccDPInt32Opt/lib/libfluidThermophysicalModels.so(_ZN4Foam11hePsiThermoINS_9psiThermoENS_11pureMixtureINS_19sutherlandTransportINS_7species6thermoINS_12hConstThermoINS_10perfectGasINS_6specieEEEEENS_22sensibleInternalEnergyEEEEEEEE7correctEv+0x2a)[0x7fa30a49c07a]
[yato212:112509] [ 5] rhoPimpleFoam[0x4269a3]
[yato212:112509] [ 6] /lib64/libc.so.6(__libc_start_main+0xf5)[0x7fa303fcd495]
[yato212:112509] [ 7] rhoPimpleFoam[0x42c5e3]
[yato212:112509] *** End of error message ***

[Awatto4123]

Hello there,
Did you manage to fix this issue? I'm having a similar issue.