CFD Online Discussion Forums

CFD Online Discussion Forums (
-   OpenFOAM (
-   -   dieselFoam injection-angle (

Rickard.Solsjo November 24, 2010 05:02

dieselFoam injection-angle
If choosing the hollowConeInjector, it requires input for inner and outerAngle in the sprayProperties.
The default value is 0 for both, so what does this mean? Does it follow the semi-emipirical tan(theta/2)=c(sqrt(rho(amb)/rho(fuel) -.0046 .....) shown by Siebers or Naber or in some other way.
Appreciate an input


All times are GMT -4. The time now is 12:48.