CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM (http://www.cfd-online.com/Forums/openfoam/)
-   -   ParaFoam Paraview ask me to "Open data with" (http://www.cfd-online.com/Forums/openfoam/82672-parafoam-paraview-ask-me-open-data.html)

idrama December 2, 2010 05:24

ParaFoam Paraview ask me to "Open data with"
 
Hello Foamers,

I compiled paraFoam/paraview. Now when I entering paraFoam in my case directory, it asks me to choose a data source: "Open data with". After I have clicked on OpenFOAM it moves on and the data a there, but I want to get rid of it. I want to have is as usual. What do i do?

tookey_1989 December 3, 2010 10:57

I have this problem each time I've had to freshly compile Paraview. If you recompile the PVfoamReader under applications/utilities/postprocessing/graphics and that should do the trick.

James

DiegoNaval December 3, 2010 11:14

Hi
I have the same problem with a binary version of Paraview, for OF1.7 how can I say to paraview to open always a .openfoam file with the same reader?

thanks?

Diego

wyldckat December 4, 2010 09:38

Greetings Diego,

Quote:

Originally Posted by DiegoNaval (Post 285885)
I have the same problem with a binary version of Paraview, for OF1.7 how can I say to paraview to open always a .openfoam file with the same reader?

Try following the point number 7 from this blog post: Using the official pre-built ParaView 3.8.0 version with OpenFOAM...

Best regards,
Bruno

idrama December 6, 2010 05:18

It works! Thank to ya all!


All times are GMT -4. The time now is 04:19.