CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM

Caelinux discretizer front end to openfoam

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes

Reply
 
LinkBack Thread Tools Display Modes
Old   July 7, 2011, 08:55
Default Update for the links I posted earlier to educational videos
  #21
New Member
 
Abouelseoud
Join Date: Dec 2010
Posts: 20
Rep Power: 7
Thouelfaqar is on a distinguished road
In the name of Allah, the most merciful and gracious. Peace upon prophet Mohamed and all prophets

Dear colleagues,
Since some of the links may have expired, we reuploaded them.
We also added some videos related to fluid structure interaction, which is expected to be quite important in advanced boat design. (The new links are at the end of the post. Note that I upload each file to 2 different sites , hoping that atleast one site would be easy for you to download from wherever you are). Hope you find them useful.

forAllah_ubuntu.7z (103.28 MB) http://www.multiupload.com/VQCWH1ERQZ
forAllah_drag_saturne_openfoam.7z (103.97 MB) http://www.multiupload.com/3F4KF9QVOK
forAllah_shipfoam_better.7z (107.67 MB) http://www.multiupload.com/TAY2V49KID
forAllah_fluid_structure_box.7z (41.82 MB) http://www.multiupload.com/P6NVFVRLTU
forAllah_CAELinux order_START_WITH_THIS.jpg (56.91 KB) http://www.multiupload.com/L9X87VK2UG
forAllah_oscillating_box.7z (27.73 MB) http://www.multiupload.com/LZEX6THGVD
forAllah_floating.7z (56.85 MB) http://www.multiupload.com/L26BBXC16D
forAllah_Wind_turbine.7z http://www.multiupload.com/LW8L0ZIY7E
forAllah_salome_draw_mesh.7z http://www.mlfnt.com/do.php?id=507041
http://www.multiupload.com/RHMWFUAUE7
FORALLAH_WIGLEY.7z http://www.multiupload.com/3HMEJHZSEF
forAllah_openFoam_introduction.7z http://www.multiupload.com/WHGC8E13X7
forAllah_salome_fluid_Tjunction.7z (90.09 MB) http://www.multiupload.com/KF0L4M4VBQ

Alternatively, the same above links are uploaded at the following links as multivolume archive
readme : http://www.mlfnt.com/do.php?id=534989
http://www.mlfnt.com/do.php?id=533394
http://www.mlfnt.com/do.php?id=534119
http://www.mlfnt.com/do.php?id=534851
http://www.mlfnt.com/do.php?id=534988
http://www.mlfnt.com/do.php?id=535999
http://www.mlfnt.com/do.php?id=536966
http://www.mlfnt.com/do.php?id=537448
http://www.mlfnt.com/do.php?id=537478
http://www.mlfnt.com/do.php?id=537540
http://www.mlfnt.com/do.php?id=537669
http://www.mlfnt.com/do.php?id=537797



The links for ANNs

forAllah_ANN_theory.7z (224.39 MB) http://www.multiupload.com/V1FXNJILMT
forAllah_ANN_example1.7z (123.6 MB) http://www.multiupload.com/8HJXE9S1D7
forAllah_ANN_example2.7z (83.52 MB) http://www.multiupload.com/1WUU1ES7AP
forAllah_ANN_example3_parta.7z (169.78 MB) http://www.multiupload.com/4GFOJ9HQZ1
forAllah_ANN_example3_partb.7z (95.19 MB) http://www.multiupload.com/9624T2D4G5
forallah_ANN_example3_partc.7z (41.95 MB) http://www.multiupload.com/B5F60WI03Q
forAllah_ANN_example3_working_now.7z (137.85 MB) http://www.multiupload.com/PH45YWSU1F

The new links for finite element and FSI

code_aster Finite element structural analysis software
http://www.multiupload.com/EOHCLH4MSK
http://www.mlfnt.com/do.php?id=505672

Fluid structure interaction using openfoam (FSI)

forAllah_icostructfoam_FSI_part1.7z (26.68 MB) http://www.multiupload.com/YN6C2B4YO2
http://www.mlfnt.com/do.php?id=506216
forAllah_openfoam_extend_FSI_part2.7z (21.79 MB) http://www.multiupload.com/6GKACUHGGF
http://www.mlfnt.com/do.php?id=506217
forAllah_FSI_part3.7z (25.44 MB) http://www.multiupload.com/JVDIDIBO97
http://www.mlfnt.com/do.php?id=506218


Note: I browse the Internet with out loading pictures(edit-->preference option-->content--> load images automatically is unchecked) and with flashblock (https://addons.mozilla.org/en-US/fir...on/flashblock/), so I would not notice if any of the uploading sites is not respectful enough. Although , I upload to these sites because they are recommended as decent still if any one noticed that any of the sites I upload to contain indecent content, please tell me so that I would look for more respectful sites.
Islam ElQatary likes this.
Thouelfaqar is offline   Reply With Quote

Old   July 15, 2011, 10:57
Default
  #22
New Member
 
Islam Elqatary
Join Date: May 2011
Posts: 19
Rep Power: 7
Islam ElQatary is on a distinguished road
thank you for ur effort
i just wanna know what is the meaning of ANN theory
Islam ElQatary is offline   Reply With Quote

Old   July 15, 2011, 18:00
Default
  #23
New Member
 
Abouelseoud
Join Date: Dec 2010
Posts: 20
Rep Power: 7
Thouelfaqar is on a distinguished road
Quote:
Originally Posted by Islam ElQatary View Post
thank you for ur effort
i just wanna know what is the meaning of ANN theory
In the name of Allah, the most merciful and gracious. Peace upon prophet Mohamed and all prophets

Dear colleague,
ANN theory is the the theory of artificial neural networks (ANNs), which are a tool that can be used in ship design. ANNs are mathematical methods for approximating a certain function based on existing data samples. You can train an ANN to take as an input the air foil coordinates and give as output the drag coefficients. (this is prediction) You can train it to take as input the drag coeff. and give as output the coordinates (this is design). The video ANN theory explains in more details.
http://forallahproject.blogspot.com/
contains several papers that use ANNs in design
Thouelfaqar is offline   Reply With Quote

Old   July 24, 2011, 02:17
Default Caelinux operating system iso file
  #24
New Member
 
Abouelseoud
Join Date: Dec 2010
Posts: 20
Rep Power: 7
Thouelfaqar is on a distinguished road
In the name of Allah, the most merciful and gracious. Peace upon prophet Mohamed and all prophets

Since the educational videos depend on Caelinux operating system and downloading the iso file from caelinux website may be difficult due to its size, we divided it into a set of smaller files and uploaded them to the following links

forAllah_caelinux_iso_mup.7z.001 (221 MB) http://www.multiupload.com/J2L4MSOM9C
forAllah_caelinux_iso_mup.7z.002 (221 MB) http://www.multiupload.com/ASD4WV5XFW
forAllah_caelinux_iso_mup.7z.003 (221 MB) http://www.multiupload.com/L7CLHE15BJ
forAllah_caelinux_iso_mup.7z.004 (221 MB) http://www.multiupload.com/6PE3W2II2R
forAllah_caelinux_iso_mup.7z.005 (221 MB) http://www.multiupload.com/3DCDR8NCZT
forAllah_caelinux_iso_mup.7z.006 (221 MB) http://www.multiupload.com/4NANFCU9ON
forAllah_caelinux_iso_mup.7z.007 (221 MB) http://www.multiupload.com/8KVCTR11A0
forAllah_caelinux_iso_mup.7z.008 (221 MB) http://www.multiupload.com/B4XMSRZ8EY
forAllah_caelinux_iso_mup.7z.009 (221 MB) http://www.multiupload.com/I5SVI83XNY
forAllah_caelinux_iso_mup.7z.010 (221 MB) http://www.multiupload.com/T74AJK218C
forAllah_caelinux_iso_mup.7z.011 (221 MB) http://www.multiupload.com/AAWWUWEFXE
forAllah_caelinux_iso_mup.7z.012 (221 MB) http://www.multiupload.com/QXNAD3XFVK
forAllah_caelinux_iso_mup.7z.013 (221 MB) http://www.multiupload.com/3V53FR04HN
forAllah_caelinux_iso_mup.7z.014 (221 MB) http://www.multiupload.com/ATXZLYHKTQ
forAllah_caelinux_iso_mup.7z.015 (221 MB) http://www.multiupload.com/RYNA8V9R7C
forAllah_caelinux_iso_mup.7z.016 (221 MB) http://www.multiupload.com/XXVAZNKNYU
forAllah_caelinux_iso_mup.7z.017 (128.74 MB) http://www.multiupload.com/6EUOFPAZI3

Once you download this multivolume archive, unzip it then use a suitable software to make a live DVD or live USB Flash to boot your computer from them


Restart and press DEL to enter set up (this varies from computer to another, it may be F12 or F1 or F2 for you) and change boot order to boot from the DVD or USB Flash

Note: I browse the Internet with out loading pictures(edit-->preference option-->content--> load images automatically is unchecked) and with flashblock (https://addons.mozilla.org/en-US/fir...on/flashblock/), so I would not notice if any of the uploading sites is not respectful enough. Although , I upload to these sites because they are recommended as decent still if any one noticed that any of the sites I upload to contain indecent content, please tell me so that I would look for more respectful sites.
Thouelfaqar is offline   Reply With Quote

Old   July 25, 2011, 14:15
Default Videos and their comprehensibility
  #25
Senior Member
 
Bernhard Linseisen
Join Date: May 2010
Location: Magdeburg/Geneva
Posts: 179
Blog Entries: 1
Rep Power: 8
Linse is on a distinguished road
Dear Abouelseoud,

thank You very much already now for sharing these tutorials! Unfortunately I did not yet have time for watching them, but the topics seem highly interesting, so I certainly will try to follow them!

Up to now I only downloaded the videos connected to salome and openFoam. Could You please tell me, which ones of the other videos are comprehensible (or if that list is shorter - incomprehensible) for non-Arabic-speakers as well?

Moreover: Do You have a list in English, French or German of the research articles Your group published on the artificial neural networks and their use in optimization? While for me that is a thing of mere interest/couriosity, for my thesis adviser they actually might be of real professional interest...

Thank You for Your answers already in advance!

Sincerely,
Bernhard
Linse is offline   Reply With Quote

Old   July 25, 2011, 15:13
Default
  #26
New Member
 
Abouelseoud
Join Date: Dec 2010
Posts: 20
Rep Power: 7
Thouelfaqar is on a distinguished road
In the name of Allah, the most merciful and gracious. Peace upon prophet Mohamed and all prophets

Dear Bernhard,
Thank you very much for your encouraging message.
First: I don't think the Arabic comments are at all necessary for following the CFD videos, they are self-explanatory with out any comments. The comments were just additional help for my students. If you find any step not clear, please do not hesitate to ask. I admit though for the ANN theory videos, especially, the comments are necessary. I'll try in future videos, God's willing, to include remarks in English as well as in Arabic.

Second: I think these are the most important videos: Only 1,2, 3 and 4 are important to start with :the rest you can watch from them what suits your area of research in the order that is convenient for you:

1. For those not familiar with ubuntu:
forAllah_ubuntu.7z (103.28 MB) http://www.multiupload.com/VQCWH1ERQZ

2. For those new to openFoam:

forAllah_openFoam_introduction.7z http://www.multiupload.com/WHGC8E13X7

3. To learn how to draw and mesh :
forAllah_salome_draw_mesh.7z http://www.mlfnt.com/do.php?id=507041
http://www.multiupload.com/RHMWFUAUE7

4. A complete simple example of Salome/openFoam/code_saturne
forAllah_drag_saturne_openfoam.7z (103.97 MB) http://www.multiupload.com/3F4KF9QVOK

5. For those interested in ship design using CFD:
forAllah_shipfoam_better.7z (107.67 MB) http://www.multiupload.com/TAY2V49KID
FORALLAH_WIGLEY.7z http://www.multiupload.com/3HMEJHZSEF

6. For those interested in Fluid structure interaction
forAllah_openfoam_extend_FSI_part2.7z (21.79 MB) http://www.multiupload.com/6GKACUHGGF
http://www.mlfnt.com/do.php?id=506217
forAllah_FSI_part3.7z (25.44 MB) http://www.multiupload.com/JVDIDIBO97
http://www.mlfnt.com/do.php?id=506218

7. For those working with finite element -based structural analysis
code_aster Finite element structural analysis software
http://www.multiupload.com/EOHCLH4MSK
http://www.mlfnt.com/do.php?id=505672


Third, the following are links to work our research group published involving ANNs: they are in English
http://www.multiupload.com/K4S63RU8ZZ
http://www.multiupload.com/MDRA74WVYR

Hope this helps. Thank you very much again for your encouragement

Note: I browse the Internet with out loading pictures(edit-->preference option-->content--> load images automatically is unchecked) and with flashblock (https://addons.mozilla.org/en-US/fir...on/flashblock/), so I would not notice if any of the uploading sites is not respectful enough. Although , I upload to these sites because they are recommended as decent still if any one noticed that any of the sites I upload to contain indecent content, please tell me so that I would look for more respectful sites.
Thouelfaqar is offline   Reply With Quote

Old   July 27, 2011, 08:58
Default
  #27
New Member
 
Abouelseoud
Join Date: Dec 2010
Posts: 20
Rep Power: 7
Thouelfaqar is on a distinguished road
Quote:
Originally Posted by Linse View Post
Dear Abouelseoud,

thank You very much already now for sharing these tutorials! Unfortunately I did not yet have time for watching them, but the topics seem highly interesting, so I certainly will try to follow them!

Up to now I only downloaded the videos connected to salome and openFoam. Could You please tell me, which ones of the other videos are comprehensible (or if that list is shorter - incomprehensible) for non-Arabic-speakers as well?

Moreover: Do You have a list in English, French or German of the research articles Your group published on the artificial neural networks and their use in optimization? While for me that is a thing of mere interest/couriosity, for my thesis adviser they actually might be of real professional interest...

Thank You for Your answers already in advance!

Sincerely,
Bernhard
In the name of Allah, the most merciful and gracious. Peace upon prophet Mohamed and all prophets


Dear Bernhard,

Regarding
the artificial neural networks and their use in optimization : these presentations might be useful: they are in English.
forAllah_edu_print.7z (2.3 MB)http://www.multiupload.com/6Q3EFJP0AH

Best wishes and my deepest regards,
Abouelseoud
Thouelfaqar is offline   Reply With Quote

Old   August 29, 2011, 08:22
Default reliability and risk analysis
  #28
New Member
 
Abouelseoud
Join Date: Dec 2010
Posts: 20
Rep Power: 7
Thouelfaqar is on a distinguished road
In the name of Allah, the most merciful and gracious. Peace upon prophet Mohamed and all prophets


Dear colleagues,
Attached are a set of educational videos related to a very important topic : incorporating uncertainty in engineering design (reliability and risk analysis). The videos illustrate how the following opensource tools can be used to achieve this goal:

openTurns (www.openturns.org), Scilab (www.scilab.org),code_aster under Salome-Meca 2011.1 (http://www.code-aster.org/V2/spip.php?article303), under Caelinux operating system (www.caelinux.org) OR Ubuntu operating system (www.ubuntu.com)

You will find that I upload each video to 2 different sites (multiupload & mlf.net). Since mlf.net only accepts small size files, I zipped each of them as a multivolume archive. To extract such an archive download all its parts to the same folder and then remove the .zip extension from their names so that the last part of the name is the number. By double clicking the first part of an archive then it will be extracted, God's willing.

Later on, God's willing, we will show how we can link openTurns to CFD software like openFoam

Here are the links:
openturns forAllah_edu_OT.7z (241.13 MB) http://www.multiupload.com/PIOSLDOCN1
http://www.mlfnt.com/do.php?id=575887
http://www.mlfnt.com/do.php?id=576099
http://www.mlfnt.com/do.php?id=576326

forAllah_edu_OT_2.7z (41.59 MB) http://www.multiupload.com/OFCAX3YEAZ
http://www.mlfnt.com/do.php?id=586739


forAllah_openturns_aster_a.7z (83.11 MB) http://www.multiupload.com/RW11NTMKPB
http://www.mlfnt.com/do.php?id=592792
forAllah_openturns_aster_b.7z (118.61 MB) http://www.multiupload.com/ZI1T4KBCH7
http://www.mlfnt.com/do.php?id=593355
http://www.mlfnt.com/do.php?id=593378
forAllah_openturns_aster_c.7z (132.82 MB) http://www.multiupload.com/QZU0YW1S12
http://www.mlfnt.com/do.php?id=593409
http://www.mlfnt.com/do.php?id=593510


openturns_scilab_optimization
forAllah_optimization_openturns_scilab.7z (421.26 MB) http://www.multiupload.com/7UMLILWTIO

http://www.mlfnt.com/do.php?id=610610
http://www.mlfnt.com/do.php?id=611232
http://www.mlfnt.com/do.php?id=612004
http://www.mlfnt.com/do.php?id=612143
http://www.mlfnt.com/do.php?id=612187

God bless you all.

Note: I browse the Internet with out loading pictures(edit-->preference option-->content--> load images automatically is unchecked) and with flashblock (https://addons.mozilla.org/en-US/fir...on/flashblock/), so I would not notice if any of the uploading sites is not respectful enough. Although , I upload to these sites because they are recommended as decent still if any one noticed that any of the sites I upload to contain indecent content, please tell me so that I would look for more respectful sites.

REMINDER:THIS VIDEO IS ONE OF A SERIES OF EDUCATIONAL VIDEOS THAT GOD HELPED US TO PREPARE: TO WATCH ANY OF THEM YOU NEED AT LEAST TO HAVE WATCHED THE FIRST ONE TO KNOW A BIT ABOUT CAELINUX OPERATING SYSTEM THAT WE ARE USING (REFER TO)

http://www.arab-eng.org/vb/t256017.html
Caelinux discretizer front end to openfoam
http://www.boatdesign.net/forums/edu...ign-37407.html
Thouelfaqar is offline   Reply With Quote

Old   September 15, 2011, 23:50
Default Procedure for installing Discretizer in Openfoam2.0.1
  #29
New Member
 
thejaraju
Join Date: Dec 2010
Posts: 8
Rep Power: 7
thejaraju is on a distinguished road
Dear friend,



as of i am working on the GUI part of the openfoam so i request you to send the procedure for installing Discretizer in Openfoam2.0.1


thanking you in advance
thejaraju is offline   Reply With Quote

Old   October 1, 2011, 10:23
Default wind turbine mesh
  #30
New Member
 
Islam Elqatary
Join Date: May 2011
Posts: 19
Rep Power: 7
Islam ElQatary is on a distinguished road
Hi
I hope u feel well
I'm trying to generate mesh for open foam and I've tried salome meca, netgen, and gmsh all of these software faild because I import 3D model from solid works (step extension) but when I generate mesh there is always a surface which has a singular matrix and mesh generation will be failed so can anyone help me in this issue
Thanks
Islam ElQatary is offline   Reply With Quote

Old   October 2, 2011, 14:33
Default
  #31
New Member
 
Abouelseoud
Join Date: Dec 2010
Posts: 20
Rep Power: 7
Thouelfaqar is on a distinguished road
Quote:
Originally Posted by Islam ElQatary View Post
Hi
I hope u feel well
I'm trying to generate mesh for open foam and I've tried salome meca, netgen, and gmsh all of these software faild because I import 3D model from solid works (step extension) but when I generate mesh there is always a surface which has a singular matrix and mesh generation will be failed so can anyone help me in this issue
Thanks
In the name of Allah, the most merciful and gracious. Peace upon prophet Mohamed and all prophets


Dear colleague,
I would recommend that u export your geometry as stl file and use snappyHexMesh. I really feel that when we use other software than built openfoam utilities for mesh generation , we really waste too much time and effort over meaningless bugs: we just waste our time and effort and even if we get around the bugs we find we learn nothing and gain no experience when we correct them because they are just bugs: we spend long times trying to make things work while there is really no problem with our understanding of the underlying concepts. This was the case for us with our work, so please try these:

http://www.hydroniumion.de/allgemein...mesh-tutorial/
http://www.hydroniumion.de/studium/s...torial-part-2/
http://www.openfoam.com/docs/user/snappyHexMesh.php
http://openfoamwiki.net/index.php/Ma...Examples/2DsHM
(this last is related to tutorial
http://repo.or.cz/w/OpenFOAM-1.6.x.g...3085795470.zip)
Thouelfaqar is offline   Reply With Quote

Old   October 2, 2011, 14:42
Default
  #32
New Member
 
Islam Elqatary
Join Date: May 2011
Posts: 19
Rep Power: 7
Islam ElQatary is on a distinguished road
Thank u for ur advise I'll try ur way
Islam ElQatary is offline   Reply With Quote

Old   October 13, 2011, 14:42
Default reliability and risk analysis-continued
  #33
New Member
 
Abouelseoud
Join Date: Dec 2010
Posts: 20
Rep Power: 7
Thouelfaqar is on a distinguished road
In the name of Allah, the most merciful and gracious. Peace upon prophet Mohamed and all prophets


Dear colleagues,
attached is a video showing how to link openTurns to code_aster and scilab without wrappers. This should be easier.

forAllah_sciwrap.7z (50.88 MB) http://www.multiupload.com/43MCAQFIYY
http://www.filesharesite.com/files/2...ciwrap.7z.html

forAllah_aster_openturns_no_wrapper_direct.7z (197.53 MB) http://www.multiupload.com/JOKI703O8U
http://www.filesharesite.com/files/2...direct.7z.html


Note: I browse the Internet with out loading pictures(edit-->preference option-->content--> load images automatically is unchecked) and with flashblock (https://addons.mozilla.org/en-US/fir...on/flashblock/), so I would not notice if any of the uploading sites is not respectful enough. Although , I upload to these sites because they are recommended as decent still if any one noticed that any of the sites I upload to contain indecent content, please tell me so that I would look for more respectful sites.

REMINDER:THIS VIDEO IS ONE OF A SERIES OF EDUCATIONAL VIDEOS THAT GOD HELPED US TO PREPARE: TO WATCH ANY OF THEM YOU NEED AT LEAST TO HAVE WATCHED THE FIRST ONE TO KNOW A BIT ABOUT CAELINUX OPERATING SYSTEM THAT WE ARE USING (REFER TO)

http://www.arab-eng.org/vb/t256017.html
Caelinux discretizer front end to openfoam
http://www.boatdesign.net/forums/edu...ign-37407.html
Thouelfaqar is offline   Reply With Quote

Old   November 2, 2011, 21:36
Default i need a help
  #34
New Member
 
Islam Elqatary
Join Date: May 2011
Posts: 19
Rep Power: 7
Islam ElQatary is on a distinguished road
hi
i'm new in openfoam and i've to simulate HAWT so i used MRFSimpleFoam to solve the problem the set up of the boundary conditions as following

External
{
type ggi;
nFaces 4285;
startFace 1203036;
shadowPatch Interior;
bridgeOverlap false;
zone External_ZONE;
}
Turbine
{
type wall;
nFaces 1260;
startFace 1207321;
}
Outlet
{
type patch;
nFaces 100;
startFace 1208581;
}
Bound1
{
type patch;
nFaces 100;
startFace 1208681;
}
Bound2
{
type patch;
nFaces 100;
startFace 1208781;
}
Inlet
{
type patch;
nFaces 100;
startFace 1208881;
}
Ground
{
type patch;
nFaces 100;
startFace 1208981;
}
Sky
{
type patch;
nFaces 100;
startFace 1209081;
}
Interior
{
type ggi;
nFaces 600;
startFace 1209181;
shadowPatch External;
bridgeOverlap false;
zone Interior_ZONE;
}
)

and i'm using OF16ext
i always get this error can anyone help me


--> FOAM FATAL ERROR:
Face zone name Interior_ZONE not found. Please check your GGI interface definition.

From function label ggiPolyPatch::zoneIndex() const
in file meshes/polyMesh/polyPatches/constraint/ggi/ggiPolyPatch.C at line 639.

FOAM aborting

Aborted

i used snappyHex to mesh the 2 region and then used mergMeshes to combine the 2 cases into 1 case
can anyone help me
Islam ElQatary is offline   Reply With Quote

Old   April 26, 2013, 13:23
Default
  #35
New Member
 
AhMeD 3Tman
Join Date: Apr 2013
Posts: 1
Rep Power: 0
zigzag.a321 is on a distinguished road
dead links

can any one update links please

thanks in advance
zigzag.a321 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wind turbine simulation Saturn CFX 45 February 8, 2016 05:42
Simulation of a single bubble with a VOF-method Suzzn CFX 18 October 2, 2009 04:18
air bubble is disappear increasing time using vof xujjun CFX 9 June 9, 2009 07:59
increasing mesh quality is leading to poor convergence tippo CFX 2 May 5, 2009 10:55
error using combination of step function xujjun CFX 1 January 15, 2008 17:46


All times are GMT -4. The time now is 21:49.