CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM (http://www.cfd-online.com/Forums/openfoam/)
-   -   floating point exception Finite area (http://www.cfd-online.com/Forums/openfoam/82733-floating-point-exception-finite-area.html)

DiegoNaval December 3, 2010 17:11

floating point exception Finite area
 
Hi everybody
I use the Finite area method, on a mesh converted with ccm20ToFoam, all are set well but some time when I run the case for different mesh refinement the run blow up at this statement saying Floating point Exception:

linearEdgeInterpolate(Us) & aMesh.Le();

what can produce that event?

Thank

Diego

Arnoldinho November 10, 2011 14:45

Hi Diego,

sorry to post to such an old thread, but I'm facing the same problem right now. Did you find the exact reason and a solution? For me it seems as if the error results from a poorly set-up mesh... But I'm not sure how to fix it, as the mesh can't be changed.

Arne


All times are GMT -4. The time now is 08:24.