solving only turbulence equations

afroz_javed · January 19, 2011, 01:53

I am here with a new problem.
It is something like an a-priori analysis of turbulence models using DNS data.
the average values of variables, like velocities and densities are available from DNS data, I need to evaluate the corresponding values of TKE and epsilon for the a-priori evaluation of this model for similar flows. I find myself ending up with two transport equations for k, and epsilon which need to be solved. I was wondering whether OpenFOAM could be used to solve these two equations without solving other equations.
I was trying using rhoSimpleFOAM and other steady turbulent solvers, by commenting out Ueqn.h, peqn.h, and heqn.h files so as these equations are not solved and only equations for k and epsilon are solved.
As usual getting lots of challenges and difficulties.
Could someone just tell me if this is the correct way of doing it or some other way exists for this kind of analysis.
Thanks in advance

nakul · January 20, 2011, 05:25

Hi,

This looks an interesting problem. If you may post what difficulties you are facing in doing this then I might be able to help.

January 19, 2011, 01:53	solving only turbulence equations	#1
afroz_javed New Member Join Date: Apr 2009 Posts: 6 Rep Power: 17	I am here with a new problem. It is something like an a-priori analysis of turbulence models using DNS data. the average values of variables, like velocities and densities are available from DNS data, I need to evaluate the corresponding values of TKE and epsilon for the a-priori evaluation of this model for similar flows. I find myself ending up with two transport equations for k, and epsilon which need to be solved. I was wondering whether OpenFOAM could be used to solve these two equations without solving other equations. I was trying using rhoSimpleFOAM and other steady turbulent solvers, by commenting out Ueqn.h, peqn.h, and heqn.h files so as these equations are not solved and only equations for k and epsilon are solved. As usual getting lots of challenges and difficulties. Could someone just tell me if this is the correct way of doing it or some other way exists for this kind of analysis. Thanks in advance

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Compressible Nozzle Flow	sebastian	OpenFOAM Running, Solving & CFD	14	September 21, 2016 10:47
Problem running buoyantFoam	anke	OpenFOAM	4	August 28, 2013 04:43
Low Mach number Compressible jet flow using LES	ankgupta8um	OpenFOAM Running, Solving & CFD	7	January 15, 2011 13:38
Error while running rhoPisoFoam..	nileshjrane	OpenFOAM Running, Solving & CFD	8	August 26, 2010 12:50
MRFSimpleFOAM goes divergenced!	renyun0511	OpenFOAM Running, Solving & CFD	0	November 19, 2009 02:11

January 20, 2011, 05:25		#2
nakul Senior Member Nakul Join Date: Apr 2010 Location: India Posts: 147 Rep Power: 16	Hi, This looks an interesting problem. If you may post what difficulties you are facing in doing this then I might be able to help.