CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM

CONVERSION OF ICEM Mesh to OpenFOAM

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 22, 2011, 08:06
Default CONVERSION OF ICEM Mesh to OpenFOAM
  #1
Member
 
Kurne
Join Date: Aug 2010
Location: Pune, INDIA
Posts: 88
Rep Power: 7
kurne is on a distinguished road
Dear All
I want to convert ICEM structured Mesh to openFOAM and I am using the standard utility fluentMeshToFoam but before using this utility which directories and files should i create.

Please Help Me.
__________________
Simulation Is Determination Of Imagination Towards Approximation


Best Regards

Mubeen K Kurne
kurne is offline   Reply With Quote

Old   January 23, 2011, 16:27
Default
  #2
New Member
 
Join Date: Dec 2010
Posts: 26
Rep Power: 6
prashant.A is on a distinguished road
Send a message via Skype™ to prashant.A
Kurne,

In the directory where you wish to convert the mesh, should you keep 0, constant, system directories (study OF's directory structure for that matter) and then issue the command:
"fluent3DMeshToFoam"

You can check the other fields associated with the command in the help section...
prashant.A is offline   Reply With Quote

Old   January 23, 2011, 23:55
Default
  #3
Member
 
Kurne
Join Date: Aug 2010
Location: Pune, INDIA
Posts: 88
Rep Power: 7
kurne is on a distinguished road
Dear Prashant
I have covert the Mesh file.Thanks A lot for support.
Take Care
__________________
Simulation Is Determination Of Imagination Towards Approximation


Best Regards

Mubeen K Kurne
kurne is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
mesh conversion Salome --> OpenFoam vaina74 Open Source Meshers: Gmsh, Netgen, CGNS, ... 38 October 23, 2014 08:42
[ICEM] How to generate sunstructured "all-tri patch-dependant" surface mesh in ICEM? jash ANSYS Meshing & Geometry 19 July 23, 2013 18:48
Transport mesh from ICEM CFD, to Fluent, to Sysnoise Wieland FLUENT 2 April 15, 2012 06:28
Boddy fitted Hexcore Mesh in ICEM Cfd Mitch CFX 0 December 29, 2008 07:07
ICEM clustering of mesh points and multiple edges webhaw CFX 4 July 25, 2007 16:29


All times are GMT -4. The time now is 20:50.