CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM

ansysToFoam

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 7, 2011, 05:22
Default ansysToFoam
  #1
Member
 
Join Date: Jun 2010
Posts: 33
Rep Power: 6
RalphS is on a distinguished road
Hello,

I have a problem. I want to use ansysToFoam, but the application doesn't run. After "Create Time" appears on the display nothing happens ...
Can someone help me?
Or some other hints to convert a mesh, produce with TurboGrid?



case> ansysToFoam test.gtm
/*---------------------------------------------------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \\ / O peration | Version: 1.7.1 |
| \\ / A nd | Web: www.OpenFOAM.com |
| \\/ M anipulation | |
\*---------------------------------------------------------------------------*/
Build : 1.7.1-03e7e056c215
Exec : ansysToFoam test.gtm
Date : Feb 07 2011
Time : 11:12:40
Host : pc6931
PID : 20129
Case : /...
nProcs : 1
SigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time
RalphS is offline   Reply With Quote

Old   February 7, 2011, 19:13
Default
  #2
Member
 
Scott
Join Date: Sep 2009
Posts: 41
Rep Power: 6
scott is on a distinguished road
I'd try exporting as a .msh file in ASCII (search the forums to find out how) and use fluentMeshToFoam

.gtm is not supported as far as I am aware for ansysToFoam, it is for .inp I think. Feel free to correct me if I am wrong.

Hope this helps!

Scott
scott is offline   Reply With Quote

Old   February 7, 2011, 22:59
Default
  #3
Member
 
Kurne
Join Date: Aug 2010
Location: Pune, INDIA
Posts: 88
Rep Power: 6
kurne is on a distinguished road
Dear RalphS
Convert the mesh from TurboGrid to fluent mesh format which will give the mesh in .msh extension say fluent.msh. Copy this fluent.msh file in to your directory and use command fluent3DMeshToFoam fluent.msh.
It will work.If still any problem then we will see it.
Take Care
__________________
Simulation Is Determination Of Imagination Towards Approximation


Best Regards

Mubeen K Kurne
kurne is offline   Reply With Quote

Old   February 8, 2011, 07:45
Default
  #4
Member
 
Join Date: Jun 2010
Posts: 33
Rep Power: 6
RalphS is on a distinguished road
Thanks,

I use ansys turbo grid 12.0.

I didn't found out, how I am able to export to an Fluent .msh Mesh file.
RalphS is offline   Reply With Quote

Old   December 7, 2012, 15:31
Default
  #5
New Member
 
Eric
Join Date: Jan 2012
Posts: 18
Rep Power: 4
EVBUCF is on a distinguished road
I know this is an old thread but I am interested in this same conversion. I have a .gtm mesh that needs to be converted for use in openFoam. Anyone know how to get this done?
EVBUCF is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 08:17.