CFD Online URL
[Sponsors]
Home > Forums > OpenFOAM

GGI case in 1.6-ext

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 19, 2011, 11:52
Default GGI case in 1.6-ext
  #1
Senior Member
 
Robert
Join Date: Sep 2010
Posts: 147
Rep Power: 6
lordvon is on a distinguished road
Hello,

In 1.6-ext, for a case that works in 1.5-dev, when I use the command 'foamJob -s -p turbDyMFoam', the terminal (OS is Ubuntu 10.04) gives:

Code:
Parallel processing using SYSTEMOPENMPI with 4 processors
Executing: mpirun -np 4 /usr/lib/OpenFOAM-1.6-ext/bin/foamExec turbDyMFoam -parallel | tee log
Which is all fine and good, but then nothing else happens (where in 1.5 dev I would see continuous reporting on all of the timesteps as the simulation ran). Furthermore I check the CPU usage and all four cores are unoccupied. So I dont really get an error but it is not working properly.

I installed 1.6-ext via: http://openfoamwiki.net/index.php/In...ucid_10.04_LTS
Under Section 2.3.2.

The only warnings/errors I see when running decomposePar:
Code:
Calculating distribution of cells
Selecting decompositionMethod metis
--> FOAM Warning : 
    From function min(const UList<Type>&)
    in file /build/buildd/openfoam-1.6-ext-1.6.0/OpenFOAM-1.6-ext/src/OpenFOAM/lnInclude/FieldFunctions.C at line 342
    empty field, returning zero
And I get the same "error" (the linked thread concludes it is ignorable) when running checkMesh as described here: face zones/sets in OpenFOAM-1.6-ext

Any help greatly appreciated. Shout if anything else is needed.
lordvon is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Editing the motorBike case, loading diffirent .stl btgyd OpenFOAM Native Meshers: snappyHexMesh and Others 1 September 26, 2011 18:24
problems in Two Phase flow using twoPhaseEulerFoam with OpenFoam 1.6 raagh77 OpenFOAM Running, Solving & CFD 0 March 6, 2010 06:11
Superlinear speedup in OpenFOAM 13 msrinath80 OpenFOAM Running, Solving & CFD 17 August 22, 2009 04:59
Is Playstation 3 cluster suitable for CFD work hsieh OpenFOAM 8 March 12, 2008 06:58
Turbulent Flat Plate Validation Case Jonas Larsson Main CFD Forum 0 April 2, 2004 10:25


All times are GMT -4. The time now is 18:15.