CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM (http://www.cfd-online.com/Forums/openfoam/)
-   -   two phase vof problem, problem with thermophysical properties (http://www.cfd-online.com/Forums/openfoam/85997-two-phase-vof-problem-problem-thermophysical-properties.html)

karthik1414 March 11, 2011 06:43

two phase vof problem, problem with thermophysical properties
 
hello all,
I am new to openfoam and cannot figure out anything from the error

For calculating the thermophysicalproperties of the two phase vof problem, we used hRhoThermo, according to the example in tutorial link https://github.com/OpenCFD/OpenFOAM-...onLiquidHeater
we have included all the pointers, included specie in options,etc... and all that we can think of. But we are getting the error message as follows

--> FOAM FATAL ERROR:
Unknown basicRhoThermo type hRhoThermo<pureMixture<constTransport<specieThermo <hConstThermo<incompressible>>>>>
Valid basicRhoThermo types are:
6
(
hRhoThermo<pureMixture<constTransport<specieThermo <hConstThermo<perfectGas>>>>>
hRhoThermo<pureMixture<sutherlandTransport<specieT hermo<hConstThermo<perfectGas>>>>>
hRhoThermo<pureMixture<sutherlandTransport<specieT hermo<janafThermo<perfectGas>>>>>
hsRhoThermo<pureMixture<constTransport<specieTherm o<hConstThermo<perfectGas>>>>>
hsRhoThermo<pureMixture<sutherlandTransport<specie Thermo<hConstThermo<perfectGas>>>>>
hsRhoThermo<pureMixture<sutherlandTransport<specie Thermo<janafThermo<perfectGas>>>>>
)


i donot know what to do more. I cannot figure out what the error message is saying.
Perfect gas?? we are using a case for incompressible fluid flow, so why perfect gas?:confused:
Please advice us on the matter and help us out.

Thanks,
Warm regards,
Karthk

mvoss March 11, 2011 09:16

did you try a "git pull" for the newest versions?

karthik1414 March 14, 2011 09:45

Quote:

Originally Posted by neewbie (Post 298996)
did you try a "git pull" for the newest versions?

hey!
thanks for the advice, but i did not understand wht this gitpull is!!
thnks in advance!! :)
regards,
kar

mvoss March 14, 2011 09:51

git is a version control system.
ive had a similar error and solved it by a "git pull"...
you might want to check here http://ww3.cad.de/foren/ubb/Forum527...5.shtml#000023 too...

karthik1414 March 15, 2011 08:49

Quote:

Originally Posted by neewbie (Post 299326)
git is a version control system.
ive had a similar error and solved it by a "git pull"...
you might want to check here http://ww3.cad.de/foren/ubb/Forum527...5.shtml#000023 too...

will try that!!! thanks a lot!!

karthik


All times are GMT -4. The time now is 01:14.