CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM (http://www.cfd-online.com/Forums/openfoam/)
-   -   Version 2.0.0 and Intel Compiler (http://www.cfd-online.com/Forums/openfoam/90191-version-2-0-0-intel-compiler.html)

muxav July 4, 2011 05:13

Version 2.0.0 and Intel Compiler
 
Hallo,
I'm wondering, if anybody managed to compile Version 2.0.0 with Intel's Compiler.
Version 1.7.1 worked perfectly with my Intel 12.0.2.
I don't use any special CFLAGS, but compilation procedure breaks after some time.
Any help would be appreciated.
Best regards,
muxav

Linse July 4, 2011 08:20

Hi Muxav,

I don't know if I can test the compilation with the intel compiler as well, but I'll get back to that later (perhaps even today). In the meantime: Are there any error messages you got, pointing as to why it didn't work?

A way one could try: Putting the binaries of the ICC into the third-Party directory and set the compiler option for the third-Party.
In OF-2.0.x/etc/bashrc you should have to set Icc as the compiler in any way, if I remember correctly...

Hope that helps somewhat...


All times are GMT -4. The time now is 02:43.