USB instalation for OpenFOAM

A.D.E · July 28, 2011, 05:18

Hi I was wondering if you can run OpenFOAM from a USB?

Thank you in advance,

A.D.E

elvis · July 28, 2011, 11:07

Hello,

there are severall USB-Stick examples out there.
Geekocfd http://susegallery.com/a/2qtLK2/geekocfd (u have 2 register) contains the types "usb" "LiveDVD", "virtual" if I am not mistaken.

http://www.cfd-online.com/Forums/ope...d-kubuntu.html

the image OF1.6-extend from this years OF workshop can be found http://rcc.its.psu.edu/ofw6/ofw6_v8.iso but I do not know how to make a LiveUSBstick from the LiveDVD

maybe CAE Linux http://www.caelinux.com/CMS/ which contains OF as well can be converted into LIVEusb-stick

read the old thread (for the very beginning of this issue)
http://www.cfd-online.com/Forums/ope...lax-based.html
Slax http://openfoamwiki.net/index.php/Main_Page look 4 SLAX

wouter · July 30, 2011, 19:14

Hello A.D.E,

I installed Ubuntu on a USB stick (8GB) and then OpenFoam (1.6-ext and 2.0.0), QTOctave, Salome and Eclipse. I run it as a bootable disc without problems.

Best regards,
Wouter

A.D.E · August 5, 2011, 05:21

Thank you both for your coments. What I did was to install Ubuntu on my external hard disc and then install the OpenFoam on that. It works perfect. The only thing is that my PC does not automatically boot from the external drive so I have to go through the BIOS set-up but its ok.

Anyhow thank you for your consideration and time and I hope I can be of assistance to you in the future.

Sincerely,

A.D.E

July 28, 2011, 05:18	USB instalation for OpenFOAM	#1
A.D.E Member Join Date: Jul 2011 Posts: 42 Rep Power: 14	Hi I was wondering if you can run OpenFOAM from a USB? Thank you in advance, A.D.E

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OpenFOAM-dev Live USB CD, SLAX based	hellorishi	OpenFOAM Installation	34	May 31, 2010 01:18
OpenFOAM Live USB based on openSUSE 11.1 created with SUSE Studio	alberto	OpenFOAM	40	May 23, 2010 16:15
openfoam1.5 on usb flash drive?	tom v.d brink	OpenFOAM Installation	5	May 28, 2009 20:19
Comet Instalation	Merkru	Siemens	0	June 12, 2006 03:31
cfx-4.2 or cfx-4.3 instalation	Antonio Melendez	CFX	1	June 28, 2001 03:58

July 28, 2011, 11:07		#2
elvis Senior Member Elvis Join Date: Mar 2009 Location: Sindelfingen, Germany Posts: 620 Blog Entries: 6 Rep Power: 24	Hello, there are severall USB-Stick examples out there. Geekocfd http://susegallery.com/a/2qtLK2/geekocfd (u have 2 register) contains the types "usb" "LiveDVD", "virtual" if I am not mistaken. http://www.cfd-online.com/Forums/ope...d-kubuntu.html the image OF1.6-extend from this years OF workshop can be found http://rcc.its.psu.edu/ofw6/ofw6_v8.iso but I do not know how to make a LiveUSBstick from the LiveDVD maybe CAE Linux http://www.caelinux.com/CMS/ which contains OF as well can be converted into LIVEusb-stick read the old thread (for the very beginning of this issue) http://www.cfd-online.com/Forums/ope...lax-based.html Slax http://openfoamwiki.net/index.php/Main_Page look 4 SLAX

July 30, 2011, 19:14		#3
wouter Senior Member Wouter van der Meer Join Date: May 2009 Location: Elahuizen, Netherlands Posts: 203 Rep Power: 17	Hello A.D.E, I installed Ubuntu on a USB stick (8GB) and then OpenFoam (1.6-ext and 2.0.0), QTOctave, Salome and Eclipse. I run it as a bootable disc without problems. Best regards, Wouter

August 5, 2011, 05:21		#4
A.D.E Member Join Date: Jul 2011 Posts: 42 Rep Power: 14	Thank you both for your coments. What I did was to install Ubuntu on my external hard disc and then install the OpenFoam on that. It works perfect. The only thing is that my PC does not automatically boot from the external drive so I have to go through the BIOS set-up but its ok. Anyhow thank you for your consideration and time and I hope I can be of assistance to you in the future. Sincerely, A.D.E