Automatic Near-Wall Treatment in OF

lentschi · August 4, 2011, 11:51

Hello,

I have one question about the wall treatment in OF. Offers OF an "Automatic Near-Wall Treatment", which switches (for the SST model) as a function of the y+ value between Low-Re- and High-Re-formulation??And which y+ value is the limit between this two formulations?

Thanks in advance.

Regards Markus

stawrogin · August 4, 2011, 12:34

Hello Markus,

there is a continous wallFunction in OF called nut/mut SpalartAllmarasWallfunction.

You will find all an interesting discussion in here:

http://www.cfd-online.com/Forums/ope...tml#post244144

Stawrogin

August 4, 2011, 11:51	Automatic Near-Wall Treatment in OF	#1
lentschi Member sirLentschi Join Date: Nov 2010 Posts: 79 Rep Power: 15	Hello, I have one question about the wall treatment in OF. Offers OF an "Automatic Near-Wall Treatment", which switches (for the SST model) as a function of the y+ value between Low-Re- and High-Re-formulation??And which y+ value is the limit between this two formulations? Thanks in advance. Regards Markus

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Commercial meshers] tmerge utility creates unwanted interface/walls comes in the final mesh	Shoonya	OpenFOAM Meshing & Mesh Conversion	11	January 20, 2012 06:23
Wall functions for near wall treatment : k - epsilon model	fivos	Main CFD Forum	4	April 27, 2011 07:44
LES near wall treatment	Valerio	FLUENT	0	April 23, 2008 07:22
Near wall treatment for k-e model	raik	Main CFD Forum	3	May 6, 2007 07:51
Enhanced Wall Treatment?	Marius	FLUENT	0	January 5, 2006 05:25

August 4, 2011, 12:34		#2
stawrogin Member Join Date: Nov 2009 Posts: 36 Rep Power: 16	Hello Markus, there is a continous wallFunction in OF called nut/mut SpalartAllmarasWallfunction. You will find all an interesting discussion in here: http://www.cfd-online.com/Forums/ope...tml#post244144 Stawrogin