CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM

I can not understand the tutorial TJunctionFan.(OP 2.0.0)

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 5, 2011, 07:35
Default I can not understand the tutorial TJunctionFan.(OP 2.0.0)
  #1
New Member
 
anonymous
Join Date: Feb 2011
Posts: 22
Rep Power: 6
asamit is on a distinguished road
Hello everyone,
I am trying to understand new cyclic while runnig the tutorial TJunctionFan. (OP 2.0.0)
I am studing two files as below.

- selectCyclics.setSet -

:
faceSet cyclicFaces new boxToFace (0.099 -0.006 0.004)(0.101 0.006 0.016)
cellSet cyclicFacesSlaveCells new boxToCell (-10 -10 -10)(0.1 10 10)
faceZoneSet cyclicFaces new setsToFaceZone cyclicFaces cyclicFacesSlaveCells

:

- Allrun -
:
# Add cyclic baffles for fan
runApplication setSet -batch selectCyclics.setSet
#runApplication createBaffles cyclicFaces '(fan_half0 fan_half1)' -overwrite
createBaffles cyclicFaces '(fan_half0 fan_half1)' -overwrite > log.createBaffles 2>&1
:

- 0/p -
:
fan_half0
{
type fan;
patchType cyclic;
f 2(100 -0.1);
value uniform 0;
}
fan_half1
{
type fan;
patchType cyclic;
f 2(100 -0.1);
value uniform 0;
}
:


As far as I understand, two cyclic-feaces (fan_haff0 and fan_half1) are using the same mesh.
Then, how they are determine the wind directions?

Thank you,
asamit
asamit is offline   Reply With Quote

Old   August 7, 2011, 05:29
Default
  #2
New Member
 
anonymous
Join Date: Feb 2011
Posts: 22
Rep Power: 6
asamit is on a distinguished road
The problem solved.

- selectCyclics.setSet -
:
#cellSet cyclicFacesSlaveCells new boxToCell (-10 -10 -10)(0.1 10 10)
cellSet cyclicFacesSlaveCells new boxToCell (0.1 -10 -10)(10 10 10)
:
asamit is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ANSYS Meshing] I need tutorial files colorful ANSYS Meshing & Geometry 5 September 19, 2014 01:21
Tutorial for subcooled nucleate boiling Asghari FLUENT 34 September 27, 2013 04:58
Problem on Fluent Tutorial: Horizontal Film Boilig Feng FLUENT 2 April 13, 2013 05:34
2D Mesh Generation Tutorial for GMSH aeroslacker Open Source Meshers: Gmsh, Netgen, CGNS, ... 12 January 19, 2012 04:52
Rotor/stator tutorial, and how to... gilberto CFX 5 January 21, 2002 10:41


All times are GMT -4. The time now is 12:35.