CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM

OpenFoam to Fluent data conversion Problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 4, 2011, 02:08
Default OpenFoam to Fluent data conversion Problem
  #1
New Member
 
KKV
Join Date: May 2009
Posts: 18
Rep Power: 16
vemps is on a distinguished road
Hello,

I am working with simple pipe flow with porous domain and the wall of the porous zone is considered as slip wall. After solving i saw there are differences when viewing the results in Paraview and data converting to Fluent and viewing the results in Fluent.
1. At the inlet i saw there are differences in velocity magnitude and pattern of contours.
2. At the midplane which cuts the slip wall, paraview showing the velocity magnitude without zero velocities at wall ( outer boundary). But Fluent after transferring the data shows zero velocity at the wall for mid plane.

Please help me where i made a mistake in transfering the data.

I am using following file for converting the openfoam data to Fluent
/*--------------------------------*- C++ -*----------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \\ / O peration | Version: 2.0.0 |
| \\ / A nd | Web: www.OpenFOAM.com |
| \\/ M anipulation | | \*---------------------------------------------------------------------------*/
FoamFile
{
version 2.0;
format ascii;
class dictionary;
location "system";
object foamDataToFluentDict;
}
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //

p 1;

U 2;

T 3;

h 4;

k 5;

epsilon 6;

gamma 150;

// ************************************************** *********************** //
Attached Images
File Type: gif Velocity-Inlet-Fluent.gif (23.9 KB, 14 views)
File Type: gif Velocity-Midplane-Fluent.gif (18.3 KB, 14 views)
File Type: gif Velocity-Midplane-ParaFoam1.GIF (26.1 KB, 11 views)
File Type: gif Velocity-Inlet-ParaFoam1.GIF (21.8 KB, 13 views)
vemps is offline   Reply With Quote

Old   August 8, 2011, 03:30
Default Problem with Fluent data conversion
  #2
New Member
 
KKV
Join Date: May 2009
Posts: 18
Rep Power: 16
vemps is on a distinguished road
Hello Users,

Please help me where i wet wrong in converting the OpenFoam data file to Fluent format.

Regards
Krishna
vemps is offline   Reply With Quote

Reply

Tags
fluent data conversion

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Reading Additional Data Quantities from Fluent into Tecplot fremder Tecplot 9 December 16, 2016 16:35
Fluent case to OpenFOAM conversion umichsct OpenFOAM 4 April 23, 2011 15:59
Convertation axisymmetric cases from Fluent to OpenFOAM Svensson OpenFOAM 0 April 19, 2011 07:08
Tecplot360 problem for reading OpenFOAM data maysmech OpenFOAM Post-Processing 5 April 13, 2011 16:37
OpenFOAM Install problem masb OpenFOAM 3 May 25, 2009 12:32


All times are GMT -4. The time now is 03:11.