CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM

Specify snappyHexMesh edges to snap

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 18, 2011, 14:49
Default Specify snappyHexMesh edges to snap
  #1
Senior Member
 
mturcios777's Avatar
 
Marco A. Turcios
Join Date: Mar 2009
Location: Vancouver, BC, Canada
Posts: 725
Rep Power: 18
mturcios777 will become famous soon enough
Hello everyone,

I've recently had a chance to look at the output from the edge snapping of snappyHexMesh and I'm quite impressed by the results. I was wondering if there was a way to specify which edges were to be snapped. With the writeObj option I see several families of edges and would like only 2 sets out of 4 to be snapped.
mturcios777 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
snappyHexMesh does not snap everywhere flowris OpenFOAM Native Meshers: snappyHexMesh and Others 6 June 11, 2013 10:47
snappyHexMesh won't work - zeros everywhere! sc298 OpenFOAM Native Meshers: snappyHexMesh and Others 2 March 27, 2011 21:11
snappyHexMesh aborting Tobi OpenFOAM Native Meshers: snappyHexMesh and Others 0 November 10, 2010 04:23
snappyHexMesh does not snap beto OpenFOAM Native Meshers: snappyHexMesh and Others 7 April 19, 2010 11:51
snappyHexMesh - geometry edges johannesk OpenFOAM Native Meshers: snappyHexMesh and Others 8 January 13, 2010 18:13


All times are GMT -4. The time now is 17:51.