open channel flow with open foam

windyday · September 24, 2011, 22:53

I would like some assistance with creating an open foam open channel model.
Can anyone point me to examples.

Its just a very simple model that i need to start with and I have no experience with open foam.

Perhaps there is a easier program to use?

regards and thanks

mgdenno · September 26, 2011, 07:22

I would suggest starting with the dam break tutorial. Once you understand that I would change the boundary conditions to create an inlet and outlet. It will be 2D at this point, then you can work toward making it 3D.

windyday · September 26, 2011, 10:13

Quote:

Originally Posted by mgdenno

I would suggest starting with the dam break tutorial. Once you understand that I would change the boundary conditions to create an inlet and outlet. It will be 2D at this point, then you can work toward making it 3D.

Thank you for your suggestion.
Will this model handle a hydraulic jump by a feature on the floor of the channel?
in 3d?

mgdenno · September 26, 2011, 10:23

Yes it will. I have been using it to model spillways and energy dissipation structures, and it seems to capture the hydraulic jumps in the stilling basins well. I think if you Google "spillway openfoam" you will find a few youtube videos showing a hydraulic jump...they are not mine, but I recall seeing them.

windyday · September 26, 2011, 17:04

ok, thanks that sounds good.
have you had anything to do with FANS?
(Finite-Analytic Navier-Stokes (FANS))
if so which do you think is the easier and more effective to use?

September 24, 2011, 22:53	open channel flow with open foam	#1
windyday New Member robert sirasch Join Date: Aug 2011 Posts: 3 Rep Power: 14	I would like some assistance with creating an open foam open channel model. Can anyone point me to examples. Its just a very simple model that i need to start with and I have no experience with open foam. Perhaps there is a easier program to use? regards and thanks

September 26, 2011, 17:04	open channel flow simulation	#5
windyday New Member robert sirasch Join Date: Aug 2011 Posts: 3 Rep Power: 14	ok, thanks that sounds good. have you had anything to do with FANS? (Finite-Analytic Navier-Stokes (FANS)) if so which do you think is the easier and more effective to use?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Boundary condition problem for open channel flow	Andy	CFX	9	June 11, 2016 07:20
Open Channel Flow	ElanMorin	FLUENT	4	February 25, 2015 16:26
Open Channel Flow	OffshoreStructuralEnginer	CFX	13	August 3, 2010 21:31
Open Channel Flow	forsumit	FLUENT	0	October 1, 2009 02:01
Open Channel flow Boundary	khalid	FLUENT	1	November 4, 2006 11:53

September 26, 2011, 07:22		#2
mgdenno Senior Member Matthew Denno Join Date: Feb 2010 Posts: 138 Rep Power: 16	I would suggest starting with the dam break tutorial. Once you understand that I would change the boundary conditions to create an inlet and outlet. It will be 2D at this point, then you can work toward making it 3D.

September 26, 2011, 10:23		#4
mgdenno Senior Member Matthew Denno Join Date: Feb 2010 Posts: 138 Rep Power: 16	Yes it will. I have been using it to model spillways and energy dissipation structures, and it seems to capture the hydraulic jumps in the stilling basins well. I think if you Google "spillway openfoam" you will find a few youtube videos showing a hydraulic jump...they are not mine, but I recall seeing them.