CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM (http://www.cfd-online.com/Forums/openfoam/)
-   -   Modelling a reactive planar impinging jet (http://www.cfd-online.com/Forums/openfoam/94211-modelling-reactive-planar-impinging-jet.html)

payam_si November 9, 2011 07:47

Modelling a reactive planar impinging jet
 
I'm trying to simulate a reactive planar impinging jet with OpenFOAM. Since the boundary conditions along x-axis (the direction of fual & oxidizer streams) and z-axis are cyclic and along y-axis are wave transmissive, the initial conditions becomes very important in my simulation. I have three questions:
1. How can I impose the initial conditions and turbulent intensities in my initial condition in the shear layer to trigger the evolution of shear generated turbulence?
2. Can I use firefoam for this modelling (with Mach No. of about 0.3) ?
3. Can I use finite rate chemistry for a reduced skeletal mechanism in firefoam ?
-Thank You


All times are GMT -4. The time now is 21:43.