CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM (http://www.cfd-online.com/Forums/openfoam/)
-   -   Spanwise Grid SetUp (http://www.cfd-online.com/Forums/openfoam/94974-spanwise-grid-setup.html)

deji December 1, 2011 12:39

Spanwise Grid SetUp
 
Hello to all this day... So here is my problem, I am using snappyHexMesh to refine the near wall region of a turbulent natural convection flow on a heated flat plate. After refining the mesh, is there a way that I can modify the mesh in the span-wise direction? Instead of the span-wise direction having identical grid spacing, how can this be done? Now keep in mind that the wall normal and stream-wise grid spacing have to be as they are...Any help??


All times are GMT -4. The time now is 02:31.