CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM

Discrete Phase Modeling (Pipe erosion) in OF 2.1.0

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By mecbe2002

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 9, 2012, 03:05
Question Discrete Phase Modeling (Pipe erosion) in OF 2.1.0
  #1
Senior Member
 
KGN
Join Date: Oct 2009
Location: Chennai, India
Posts: 121
Rep Power: 16
mecbe2002 is on a distinguished road
Hi all,

I want to model erosion in a pipe-elbow configuration (Oil+sand, gas+sand) using Euler-Lagrage solver, Oil as continuous phase and sand as discrete phase. Also i want to include the following
  1. Interaction with the continuous phase (mass, momentum, energy transfer)
  2. Effect of turbulence on the discrete phase
  3. Tracking discrete phase
  4. Including Drag law
  5. Saffman lift force
  6. Erosion rate calculation
  7. Specifying dicrete phase injection type (surface/cone etc)
  8. Impact angle calculation
Which solver to use and how to incude the above mentioned models, Initial conditions.

Regards
KGN
engineer.iman likes this.
mecbe2002 is offline   Reply With Quote

Old   January 10, 2012, 02:15
Default
  #2
Senior Member
 
KGN
Join Date: Oct 2009
Location: Chennai, India
Posts: 121
Rep Power: 16
mecbe2002 is on a distinguished road
Hi all,

I think "bubbleFoam" will be suitable for my simulation, since the volume fraction i ll be considering is around 10%. If any one of you have a setup file for simulating erosion in a simple pipe-elbow configuration or a tutorial case would be helpful for me.

Thanks
KGN
mecbe2002 is offline   Reply With Quote

Old   January 24, 2012, 01:54
Default
  #3
Senior Member
 
KGN
Join Date: Oct 2009
Location: Chennai, India
Posts: 121
Rep Power: 16
mecbe2002 is on a distinguished road
Any help ???
mecbe2002 is offline   Reply With Quote

Old   February 2, 2012, 02:17
Question
  #4
Senior Member
 
KGN
Join Date: Oct 2009
Location: Chennai, India
Posts: 121
Rep Power: 16
mecbe2002 is on a distinguished road
Any help ???
mecbe2002 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Erosion modeling in OpenFOAM 2.1.0 mecbe2002 OpenFOAM 6 November 9, 2017 22:29
Discrete Phase Model vittal FLUENT 4 October 28, 2014 11:07
behavior of two phase flow in a pipe Sonia84 FLUENT 5 September 17, 2013 17:31
fluid flow fundas ram Main CFD Forum 5 June 17, 2000 22:31
Discrete Phase Modeling X.Tang FLUENT 0 April 25, 2000 09:17


All times are GMT -4. The time now is 04:16.