OpenFOAM

Rating Thread / Thread Starter	Last Post	Replies	Views
Sticky: OpenFOAM.com versus OpenFOAM.org: Which version to use? wyldckat	March 25, 2023 07:50 by ancolli	19	59,113
Sticky: Getting Started with OpenFOAM ( 1 2) wyldckat	August 14, 2022 13:55 by mikethe1wheelnut	25	50,577
Sticky: Map of the OpenFOAM Forum - Understanding where to post your questions! wyldckat	September 2, 2021 05:29 by hakosaj	10	21,715
Sticky: How to contribute to the community of OpenFOAM users and to the OpenFOAM technology wyldckat	November 10, 2017 15:54 by rdbisme	17	20,465
Sticky: How to give enough info to get help linnemann	September 20, 2017 09:19 by linnemann	8	55,188
Sticky: Wiki ( 1 2 3 ... Last Page) gschaider	December 31, 2014 07:34 by wyldckat	178	67,331
PC specification for OpenFOAM A.D.E	July 8, 2011 07:42 by olivierG	5	3,758
OpenFOAM 2.0.0 and Turbomachinery lindner	July 8, 2011 07:35 by lindner	0	2,228
SpalartAllmaras and BuoyantBoussinesq for heat Transfer Aerospace	July 8, 2011 07:18 by Aerospace	0	1,571
errors with flux scheme venkataramana	July 8, 2011 05:45 by Tushar@cfd	3	1,313
Reaction products display megacrout	July 8, 2011 05:19 by megacrout	7	1,697
What is meaning of compactNormalStress in the solidDisplacementFoam? liuhuafei	July 8, 2011 04:18 by liuhuafei	0	1,797
Plotting Residuals ata	July 8, 2011 02:50 by joel.lehikoinen	12	13,757
Setting the Velocity Field Adammann	July 8, 2011 02:15 by Bernhard	1	1,639
Coupling of DEM with Openfoam mali28	July 8, 2011 01:19 by flowman	2	3,117
rhoCentralFoam nsreddysrsit	July 7, 2011 23:47 by nsreddysrsit	0	1,740
gas flow through a pipe megacrout	July 7, 2011 14:47 by nsf	8	3,974
Interface location problem in interFoam cfd_user2011	July 7, 2011 12:04 by nimasam	1	1,317
firefoam windwin	July 7, 2011 06:21 by francescomarra	1	1,749
TVD scheme limitedLinear only first order accurate? Rickard.Solsjo	July 7, 2011 04:53 by Rickard.Solsjo	0	2,102
Previous version with git flowris	July 7, 2011 01:37 by flowris	3	1,969
How to read a mesh from a directory other than the default tutorial directory mali28	July 6, 2011 14:08 by nimasam	1	1,664
variable geometry turbine Peter_600	July 6, 2011 09:35 by Peter_600	0	1,267
gradScheme Calculation doubtsincfd	July 6, 2011 08:31 by kathrin_kissling	1	1,413
Surface Roughness Jochem	July 6, 2011 06:17 by Jochem	2	2,572
May I know more about tensor calculation? aki_yafuji	July 6, 2011 02:33 by kathrin_kissling	5	1,500
icoFoam vs simpleFoam lovecraft22	July 6, 2011 00:59 by lovecraft22	2	3,583
decomposePare error with parMetis tonyuprm	July 5, 2011 15:49 by tonyuprm	7	1,989
Cantera and OF 1.7.1 newOFuser	July 5, 2011 15:40 by newOFuser	0	1,185
Foam::sigFpe::sigFpeHandler(int) Error usergk	July 5, 2011 10:31 by usergk	5	2,548
OpenFOAM Axial Fan miteshgelani	July 5, 2011 08:53 by val46	1	4,316
Using solidBodyMotion for rigid body motion L1011	July 5, 2011 04:59 by OF_NACA	4	5,604
Heat transfer of liquids in a pipe Andrev	July 4, 2011 12:19 by Andrev	2	1,391
Manifold Absolute Pressure in Engine Simulations abminternet	July 4, 2011 11:45 by abminternet	4	2,108
low Reynolds Model for pipe flow RugbyGandalf	July 4, 2011 11:28 by RugbyGandalf	9	3,046
Mesh tetrahedral with firefoam 1.7 ntd	July 4, 2011 09:53 by ntd	0	1,788
Version 2.0.0 and Intel Compiler muxav	July 4, 2011 08:20 by Linse	1	1,438
decomposePar gives errors of_user_	July 4, 2011 05:27 by of_user_	1	3,045
Increasing Iter. number of GAMG in pimpleDyMFoam with GGI waku2005	July 3, 2011 20:21 by waku2005	0	1,444
any access to update mass injected in InjecteModel? alundilong	July 3, 2011 16:47 by alundilong	1	1,303
blockMesh and surface mesh doubtsincfd	July 3, 2011 01:26 by AlanR	1	1,879
Boundary condition problems Rose2011	July 1, 2011 12:00 by Rose2011	2	2,460
buoyantBoussinesqPisoFoam windwin	July 1, 2011 05:43 by al_pr	1	1,246
Bifurcation explode at intersection liguifan	July 1, 2011 04:34 by lovecraft22	15	1,607
buoyantSimpleFoam with inflow and ouflow. masb	July 1, 2011 03:28 by olhe0002	7	2,081
U.correctBoundaryConditions() ata	July 1, 2011 02:55 by ata	2	5,155

Read this first: How to ask a question on the forums

Page 163 of 239

163

	New posts		Hot thread with new posts
	No new posts		Hot thread with no new posts
	Thread is closed

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

All times are GMT -4. The time now is 23:54.