CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ParaView (http://www.cfd-online.com/Forums/paraview/)
-   -   data range problem (http://www.cfd-online.com/Forums/paraview/107542-data-range-problem.html)

bptsj September 30, 2012 13:33

data range problem
 
I'm very new to ParaView and am using it for output from Elmer FEA. I'm loading a file case001.vtu and do see the mesh structure along with a 'temperature' data label. However the data range is [0 322] which is incorrect. In other post processors the true range is [322.0 349.79].

Any thoughts as to what I'm doing wrong?

Thanks,
Brian

wyldckat October 5, 2012 10:35

Greetings Brian and welcome to the forum!

There might be an export problem in Elmer, where the ".vtu" file wasn't properly created.

You can try and use the menu "File -> Save Data" to export to CSV and then inspect in Calc/Excel where exactly ParaView is seeing the 0 values.

It could also be a problem related to surface vs volume mesh. In other words, in the other post-processors you might be seeing the volume mesh, but on ParaView you're seeing the surface mesh. That would explain why you have 0 values in ParaView.

Best regards,
Bruno


All times are GMT -4. The time now is 16:21.