Information about Plot over line

redrum86 · March 29, 2013, 05:48

Hi, I started using Paraview a couple days ago fot my thesis, and I have a problem about Plot over line... It is possible to use this command for more elements at the same time in order to see in the same graphic variables from these different elements? Because I have to compare the evolution of the bottom profile in a particular section of a channel, and I have made some simulations at different times, so I would like to compare these different profiles on the same plot.
Hope I explained myself, my english is very poor!

thanks

wyldckat · April 1, 2013, 07:32

Greetings Vincenzo,

OK, if I understand you correctly, you want more than one plot over line displayed in the same graph.
Here's what I managed to figure out:

Apply the filter "Plot over Line" to the main data, as many times as you need.
You wont like this one, but now you'll have to use the "Calculator" filter on most of the "Plot over Line" entries and tell it to create new fields based on the old ones, but with a different name. For example, to create a new field based on "p", but with the name "p_out", configure the calculator with the following:
- Result Array Name: p_out
- below that entry, it's the calculation, for which you simply use: p
Select all of the resulting calculators and apply the filter "Append Geometry".
Then apply to the last one the filter "Plot Data".
Then on the "Display" tab of the "Plot Data" entry, configure appropriately.

Or instead of using such a complicated method:

Apply as many "Plot over Line" filters you need.
Choose one at a time and go to the menu "File -> Save Data" and export to CSV.
Open the various CSV files, rename the columns you want renamed.
Then open the CSV files in LibreOffice's Calc or Office's Excel and do the plots there!
- Or import the CSV files back to ParaView and use the "Plot Data" filter.

Best regards,
Bruno

redrum86 · April 1, 2013, 09:25

I chose the second option, it works well! thank u a lot anyway

redrum86 · April 2, 2013, 11:23

Hi, I have an other question but I don't know if you can say something about it... what kind of interpolation Plot over line does? is it a linear one?
Thanks anyway

wyldckat · April 2, 2013, 16:54

Hi Vincenzo,

I haven't checked the VTK source code, but the answer given on this email seems to be related and/or make sense: http://permalink.gmane.org/gmane.com...view.user/9886

Best regards,
Bruno

March 29, 2013, 05:48	Information about Plot over line	#1
redrum86 New Member Vincenzo Sportiello Join Date: Mar 2013 Posts: 3 Rep Power: 2	Hi, I started using Paraview a couple days ago fot my thesis, and I have a problem about Plot over line... It is possible to use this command for more elements at the same time in order to see in the same graphic variables from these different elements? Because I have to compare the evolution of the bottom profile in a particular section of a channel, and I have made some simulations at different times, so I would like to compare these different profiles on the same plot. Hope I explained myself, my english is very poor! thanks

April 1, 2013, 07:32		#2
wyldckat Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 4,228 Blog Entries: 31 Rep Power: 45	Greetings Vincenzo, OK, if I understand you correctly, you want more than one plot over line displayed in the same graph. Here's what I managed to figure out: Apply the filter "Plot over Line" to the main data, as many times as you need. You wont like this one, but now you'll have to use the "Calculator" filter on most of the "Plot over Line" entries and tell it to create new fields based on the old ones, but with a different name. For example, to create a new field based on "p", but with the name "p_out", configure the calculator with the following: Result Array Name: p_out below that entry, it's the calculation, for which you simply use: p Select all of the resulting calculators and apply the filter "Append Geometry". Then apply to the last one the filter "Plot Data". Then on the "Display" tab of the "Plot Data" entry, configure appropriately. Or instead of using such a complicated method: Apply as many "Plot over Line" filters you need. Choose one at a time and go to the menu "File -> Save Data" and export to CSV. Open the various CSV files, rename the columns you want renamed. Then open the CSV files in LibreOffice's Calc or Office's Excel and do the plots there! Or import the CSV files back to ParaView and use the "Plot Data" filter. Best regards, Bruno __________________ How to build OpenFOAM + Third Party tools How to post code using [CODE]

April 2, 2013, 16:54		#5
wyldckat Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 4,228 Blog Entries: 31 Rep Power: 45	Hi Vincenzo, I haven't checked the VTK source code, but the answer given on this email seems to be related and/or make sense: http://permalink.gmane.org/gmane.com...view.user/9886 Best regards, Bruno __________________ How to build OpenFOAM + Third Party tools How to post code using [CODE]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
compressible flow in turbocharger	riesotto	OpenFOAM	48	April 20, 2013 10:52
mesh airfoil NACA0012	anand_30	OpenFOAM Meshing & Mesh Conversion	12	December 12, 2011 04:16
channelFoam for a 3D pipe	AlmostSurelyRob	OpenFOAM	3	June 24, 2011 13:06
1.7.x Environment Variables on Linux 10.04	rasma	OpenFOAM Installation	9	July 30, 2010 04:43
Plot over line different cases	ep4	OpenFOAM Paraview & paraFoam	1	November 27, 2008 11:47

April 1, 2013, 09:25		#3
redrum86 New Member Vincenzo Sportiello Join Date: Mar 2013 Posts: 3 Rep Power: 2	I chose the second option, it works well! thank u a lot anyway

April 2, 2013, 11:23		#4
redrum86 New Member Vincenzo Sportiello Join Date: Mar 2013 Posts: 3 Rep Power: 2	Hi, I have an other question but I don't know if you can say something about it... what kind of interpolation Plot over line does? is it a linear one? Thanks anyway