CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Visualization & Post-Processing Software > ParaView

[General] Same process but at different distance

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 20, 2020, 18:56
Default Same process but at different distance
  #1
Member
 
X
Join Date: Jan 2019
Posts: 63
Rep Power: 7
mcfdma is on a distinguished road
Hello.

As seen in the first figure, I have a 2D axisymmetric geometry.
integratevariable.jpg
For postprocessing, I need to slice along y-axis, an example in the second figure is shown followed by applying integrate variable.
slice.png
Since I need to do this at different x coordinate, could someone suggest me a quicker way (automated way or command) to specify the slice gap and then apply integrate variable and record the values in a csv or txt file.

Any help is appreciated.
mcfdma is offline   Reply With Quote

Reply

Tags
paraview, post procesing

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem running in parralel Val OpenFOAM Running, Solving & CFD 1 June 12, 2014 03:47
error 262144 and unexpected disconnect when run on 2 nodes Emily1412 SU2 Installation 1 April 10, 2014 18:08
How to setup a simple OpenFOAM cluster? TommiPLaiho OpenFOAM Installation 3 October 27, 2013 16:15
Jitterin bow shock stand-off distance Daniel Main CFD Forum 0 June 21, 2006 08:43
Level set & distance functions Renato. Main CFD Forum 7 February 7, 2006 07:46


All times are GMT -4. The time now is 07:25.