|
[Sponsors] |
October 5, 2000, 08:56 |
Darcy
|
#1 |
Guest
Posts: n/a
|
hi everyone, i need u guys to help me out with this darcy stuff in phoenics. i am simulating a single phase reaction vessel with three inlets and one outlet. i need to introduce some packing material in the reactor. how can i define this with the help of darcy. its a 2D situation.help me. saif.
|
|
December 8, 2000, 11:40 |
Re: Darcy
|
#2 |
Guest
Posts: n/a
|
In VR, use a 'Blockage' object made of 'domain material'. Set a linear or quadratic momentum source, depending on the form of the pressure-drop correlation. See Section 5.2.3 of TR/326 for a description of the momentum source options. If the pressure drop correlation is based on 'device velocity', set the area porosities, if it is based on 'approach velocity', you don't need the porosities.
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
error about solving darcy equation with mixed FEM | field | Main CFD Forum | 0 | September 10, 2007 23:08 |
Probems with Darcy | Matthias | CFX | 1 | August 17, 2005 18:29 |
confused with Darcy and Fanning | queram | Main CFD Forum | 5 | February 5, 2005 15:26 |
Darcy-Forscheimer Transport Eqn | Stan | Main CFD Forum | 3 | April 2, 2002 14:43 |
Darcy + multiphase? | George Bergantz | Siemens | 1 | March 14, 2002 05:07 |