CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Phoenics

periodic boundary condition

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 16, 2000, 02:38
Default periodic boundary condition
  #1
dipak
Guest
 
Posts: n/a
How to give periodic boundary condition in PHOENICS?

Thnaks. Dipak
  Reply With Quote

Old   November 16, 2000, 05:51
Default Re: periodic boundary condition
  #2
Mike Malin
Guest
 
Posts: n/a
The PHOENICS built-in potions only allow periodic b.c's in the x-direction, which is activated by putting xcycle=t in the q1 input file.

Periodic b.c.'s in the other coordinate directions can be achieved by user-generated GROUND coding, as done for example by:

S.B.Beale,' Laminar fully-developed flow and heat transfer in an offset rectangular plate-fin surface', PHOENICS Journal, Vol.3, No.1, p1, (1990).

PHOENICS documentation on fully-developed periodic flow can be found at the following web address:

http://www.cham.co.uk/phoenics/d_polis/d_enc/fdf.htm#3
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Periodic boundary condition Arif FLUENT 2 January 17, 2014 07:48
Periodic boundary condition? Sima Phoenics 0 October 8, 2007 01:56
Periodic Boundary condition Aerodecom FLUENT 2 May 30, 2007 01:03
periodic boundary condition tucker FLUENT 3 May 23, 2005 06:56
PERIODIC BOUNDARY CONDITION Stex CFX 0 May 27, 2004 07:55


All times are GMT -4. The time now is 05:14.