CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Phoenics

how to run successfully?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 7, 2001, 07:50
Default how to run successfully?
  #1
blue moon
Guest
 
Posts: n/a
Hello,everyone, As a new learner of PHOENICS,I have one problem to slove.After I edit the Q1 file in VR_EDITOR, the software can't run sucessfully. Even after I load a example file from the libraries,the software still can't run successfully, the image of convengence graph only appear a few second,then it stop working.And the LUOUT file tells me it's a normal stop.I don't know the reason and how to solve the problem. Would you please to help me? Thanks for your help!
  Reply With Quote

Old   April 8, 2001, 05:02
Default how to unlock Phoenics?
  #2
mechighel Farid
Guest
 
Posts: n/a
Hello,everyone, As a new learner of PHOENICS,I have one problem to slove: How to unlock Phoenics. Would you please to help me? Thanks for your help!
  Reply With Quote

Old   April 8, 2001, 05:40
Default Re: how to unlock Phoenics?
  #3
blue moon
Guest
 
Posts: n/a
To unlock PHOENICS,first,yoy should insert your dongle properly. Then,you can change the right ID number in CONFIG file. At last,you can test the software by some examples of the libraries.
  Reply With Quote

Old   April 9, 2001, 02:55
Default Re: how to run successfully?
  #4
Leon Mills
Guest
 
Posts: n/a
Try increasing the number of seeps in the calculation. This should get around the problem.

  Reply With Quote

Old   April 9, 2001, 20:54
Default Re: how to run successfully?
  #5
bluemoon
Guest
 
Posts: n/a
Dear Sir:

Thanks for your help.Accoring to your revelation,I can run examples successfully. And I also find if I change the CHAM file and set pace to on, the convengence graph also can keep for a while until I end the calculation.

However,I still have a question. That's to say I can't run my model successfully.After I edit the Q1 file in VR_EDITOR, the software can't begin to calculate.The screen tells me that Eardat has been read for IRUN=1 LIBREF=302,Error stop reached check data.

I don't know why and how to slove it.

Would you please to help me again?

Thanks very much!
  Reply With Quote

Old   May 22, 2001, 09:00
Default Re: how to run successfully?
  #6
Riadh Azzawi
Guest
 
Posts: n/a
1- try to restart your pc first and then try again.

2- if this don't help then delete the Q1 in D_priv and open phoenics again, he will make an empty Q1 file automatically.

best regards,

R. Azzawi
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Has anyone successfully used transition modell..p2 PetrK CFX 12 May 26, 2006 16:27
have anyone simulate Tutorial_HVAC successfully? billpeace CFX 1 May 22, 2006 06:06
Has anyone successfully used transition modelling? Chebeba CFX 15 May 19, 2006 14:21
How to converge successfully? mei FLUENT 0 January 27, 2002 06:17


All times are GMT -4. The time now is 19:09.