CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Phoenics (http://www.cfd-online.com/Forums/phoenics/)
-   -   which program in phoenics can change CAD file (http://www.cfd-online.com/Forums/phoenics/51198-program-phoenics-can-change-cad-file.html)

Xyj May 17, 2001 01:06

which program in phoenics can change CAD file
 
which program in phoenics can change CAD file into phoenics geometry file? thanks

Riadh Azzawi May 22, 2001 08:54

Re: which program in phoenics can change CAD file
 
you have to use either 3d face and export it to DXF format, or the better is to make a solid in CAD and then expot it as STL ( non binary) format, then you can import it with no problem into PHOENICS.

I hope this help,

Ing. R. Azzawi

xyj May 22, 2001 21:50

Re: which program in phoenics can change CAD file
 
yes, I know that using VR can import STL format file . My question is in phoenics which program do this, do the work import stl file if i doesn't use VR? thank you for your answer.

cfdmanW May 25, 2001 14:36

Re: which program in phoenics can change CAD file
 
if you want to do structured grids then there is a package called, i believe, GeoGrid-CSI which i have heard does a wonderful job interfacing with PHOENICS. this package will read in IGES files and then you can work with the CAD data to generate a multiblock structured mesh for import into PHOENICS.

xyj May 29, 2001 06:48

Re: which program in phoenics can change CAD file
 
in phoenics/d_intfac/d_cadpho/stlcham.htm, it said that there exist a file call stlcham that can change CAD geometry into phoenics style data file. But where the stlcham is? In phoenics, I can't find it. I didnt want use Vr to import a CAD stl file, I hope I can use stlcham to change CAD stl file into Phoneics data file. Where I can find the program STLCHAM?


All times are GMT -4. The time now is 19:40.