CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Phoenics

which program in phoenics can change CAD file

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 17, 2001, 01:06
Default which program in phoenics can change CAD file
  #1
Xyj
Guest
 
Posts: n/a
which program in phoenics can change CAD file into phoenics geometry file? thanks
  Reply With Quote

Old   May 22, 2001, 08:54
Default Re: which program in phoenics can change CAD file
  #2
Riadh Azzawi
Guest
 
Posts: n/a
you have to use either 3d face and export it to DXF format, or the better is to make a solid in CAD and then expot it as STL ( non binary) format, then you can import it with no problem into PHOENICS.

I hope this help,

Ing. R. Azzawi
  Reply With Quote

Old   May 22, 2001, 21:50
Default Re: which program in phoenics can change CAD file
  #3
xyj
Guest
 
Posts: n/a
yes, I know that using VR can import STL format file . My question is in phoenics which program do this, do the work import stl file if i doesn't use VR? thank you for your answer.
  Reply With Quote

Old   May 25, 2001, 14:36
Default Re: which program in phoenics can change CAD file
  #4
cfdmanW
Guest
 
Posts: n/a
if you want to do structured grids then there is a package called, i believe, GeoGrid-CSI which i have heard does a wonderful job interfacing with PHOENICS. this package will read in IGES files and then you can work with the CAD data to generate a multiblock structured mesh for import into PHOENICS.
  Reply With Quote

Old   May 29, 2001, 06:48
Default Re: which program in phoenics can change CAD file
  #5
xyj
Guest
 
Posts: n/a
in phoenics/d_intfac/d_cadpho/stlcham.htm, it said that there exist a file call stlcham that can change CAD geometry into phoenics style data file. But where the stlcham is? In phoenics, I can't find it. I didnt want use Vr to import a CAD stl file, I hope I can use stlcham to change CAD stl file into Phoneics data file. Where I can find the program STLCHAM?
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to set mass source term in Phoenics VR program Dan Phoenics 1 October 23, 2008 19:08
how to write a code or program for phoenics??????? Manjinder Phoenics 0 December 7, 2006 02:06
Changing gambit file without change of case file?? Asghari FLUENT 2 August 28, 2006 13:48
where is output data file[PHOENICS] DSF Main CFD Forum 1 June 8, 2000 09:15
where is output data file[PHOENICS] DSF CD-adapco 0 May 30, 2000 11:49


All times are GMT -4. The time now is 19:36.