CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Phoenics

commands

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 4, 2001, 10:58
Default commands
  #1
Ricardo
Guest
 
Posts: n/a
Where is the command xvlast,yvlast? How it works? I am learning how to use Phoenics?

Thanks
  Reply With Quote

Old   September 5, 2001, 04:08
Default Re: commands
  #2
Kike
Guest
 
Posts: n/a
Dear Ricardo

It is XULAST. Try to see them in POLIS or users manuals. Both are excelent tools to start learning PHOENICS. There you can find how YOU can works with them.

The following lines were extracted from POLIS Encyclopaedia: www.cham.co.uk/

****************************

XULAST

---- Real; default=1.0; group 3 ----- -

XULAST....is the overall length of the integration domain in the x-direction, measured in metres for

CARTES=T, and in radians for CARTES=F.

The U in the name is a reminder that the staggered-grid arrangements entail that the extremity of the

domain in the x-direction is occupied by a velocity (specifically, U1 and U2) location. Grid points at

which pressure, temperature, volume fraction and other scalar quantities are located lie halfway

between velocity locations.

In parabolic calculations, XULAST can be changed as a function of downstream location by means of the

parameter AZXU.

*****************************

Try to see also GRDPWR command for more info about XULAST and symilars. We are here to help you to learn (if we can).

Regards

Kike
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
TUI Commands from GUI? Carlos FLUENT 6 May 22, 2013 18:05
How to use the spline commands tnm23 OpenFOAM Native Meshers: blockMesh 10 December 13, 2009 03:16
*** Missing TUI commands??? *** Carlos FLUENT 2 February 24, 2008 06:53
Journal Commands manu FLUENT 2 February 19, 2008 06:48
TUI commands logging??? carno FLUENT 6 August 23, 2007 01:21


All times are GMT -4. The time now is 15:29.