CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Phoenics

how to set heat source of time square

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 3, 2001, 08:30
Default how to set heat source of time square
  #1
chih
Guest
 
Posts: n/a
hi all:

I am runing one model about tunnel fire.

The fire model is Q(W)=47t(sec)^2.How to set

the fire in heat source.

Thanks a lot

chih
  Reply With Quote

Old   October 3, 2001, 09:22
Default Re: how to set heat source of time square
  #2
alex
Guest
 
Posts: n/a
a good idea will be to light a match to begin with.
  Reply With Quote

Old   October 4, 2001, 00:15
Default Re: how to set heat source of time square
  #3
leon
Guest
 
Posts: n/a
Dear chih

Depending on how accurate you want the model to be. I know that there is a way to program via ground to do this but for me I do things a little simpler. I just convert the fire growth / heat release rate into discrete time elements say 10 sec, then make each 'fire object' active for only to 10 sec time interval. I have found that using the discrete time method accurate enough for the fire modeling that I have been doing.

Hope this helps

Leon
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Time dependent Energy source Nitesh Main CFD Forum 0 July 17, 2006 13:19
time dependent energy source Nitesh FLUENT 0 July 17, 2006 13:14
time dependent source gbj FLUENT 1 April 9, 2005 08:06
Input heat source (heat/unit volume) in 2D Polly FLUENT 2 March 18, 2005 01:04
Heat source Polly FLUENT 2 January 26, 2005 21:30


All times are GMT -4. The time now is 04:53.