CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Phoenics

How to improve the pressure

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 17, 2001, 04:46
Default How to improve the pressure
  #1
sun haitao
Guest
 
Posts: n/a
I have a question. It is a transient problemuration--0.01s. In a rectangle cavity, there is a conductor with Fixed heat flux(1000000w). The cavity only has a outlet and fills with air. The result of pressure and velocity are very small. I have some experimental result, and the pressure should be 2 bar. I don't know how to calculate this problem. I have appended the cheng4.q1 file with the letter.

Best Regards!

cheng4.q1: TALK=T;RUN( 1, 1)

************************************************** **********

Q1 created by VDI menu, Version 3.4, Date 10/08/01 CPVNAM=VDI;SPPNAM=Core ************************************************** ********** IRUNN = 1 ;LIBREF = 0 ************************************************** ********** Group 1. Run Title TEXT(Test ) ************************************************** ********** Group 2. Transience STEADY=F

* Set overall time and no. of steps RSET(U,0.000000E+00,1.000000E-02,10)

* Modify regions ************************************************** ********** Groups 3, 4, 5 Grid Information

* Overall number of cells, RSET(M,NX,NY,NZ,tolerance) RSET(M,20,20,20)

* Set overall domain extent:

* xulast yvlast zwlast

name XSI= 7.000000E-03; YSI= 2.000000E-03; ZSI= 3.500000E-03 RSET(D,CHAM ) ************************************************** ********** Group 6. Body-Fitted coordinates ************************************************** ********** Group 7. Variables: STOREd,SOLVEd,NAMEd ONEPHS = T

* Non-default variable names NAME(147) =WDIS ; NAME(148) =PRPS NAME(149) =TEM1 ; NAME(150) =SPH1

* Solved variables list SOLVE(P1 ,U1 ,V1 ,W1 ,TEM1)

* Stored variables list STORE(SPH1,PRPS,WDIS)

* Additional solver options SOLUTN(P1 ,Y,Y,Y,N,N,Y) SOLUTN(TEM1,Y,Y,Y,N,N,Y) TURMOD(LVEL)

************************************************** ********** Group 8. Terms & Devices ************************************************** ********** Group 9. Properties SETPRPS(1, 0) RHO1 = 1.189000E+00 PRESS0 = 1.000000E+05 TEMP0 = 2.730000E+02 CP1 = 1.005000E+03 ENUL = 1.544000E-05 DVO1DT = 3.410000E-03 PRNDTL(TEM1) = 1.000000E+00 ************************************************** ********** Group 10.Inter-Phase Transfer Processes ************************************************** ********** Group 11.Initialise Var/Porosity Fields FIINIT(P1 ) = 1.000000E+00 ;FIINIT(WDIS) = 2.000000E-04 FIINIT(TEM1) = 1.000000E+01

No PATCHes used for this Group

INIADD = F ************************************************** ********** Group 12. Convection and diffusion adjustments

No PATCHes used for this Group ************************************************** ********** Group 13. Boundary & Special Sources

No PATCHes used for this Group

EGWF = T ************************************************** ********** Group 14. Downstream Pressure For PARAB ************************************************** ********** Group 15. Terminate Sweeps LSWEEP = 300 RESFAC = 1.000000E-03 ************************************************** ********** Group 16. Terminate Iterations ************************************************** ********** Group 17. Relaxation RELAX(P1 ,LINRLX, 1.000000E+00) ************************************************** ********** Group 18. Limits VARMAX(U1 ) = 1.000000E+06 ;VARMIN(U1 ) =-1.000000E+06 VARMAX(V1 ) = 1.000000E+06 ;VARMIN(V1 ) =-1.000000E+06 VARMAX(W1 ) = 1.000000E+06 ;VARMIN(W1 ) =-1.000000E+06 ************************************************** ********** Group 19. EARTH Calls To GROUND Station USEGRD = T ;USEGRX = T ASAP = T RADIA = 0.000000E+00 ;RADIB = 0.000000E+00 EMISS = 0.000000E+00 CSG1 ='M' ************************************************** ********** Group 20. Preliminary Printout ECHO = T ************************************************** ********** Group 21. Print-out of Variables OUTPUT(WDIS,Y,N,N,N,N,N) OUTPUT(SPH1,N,N,Y,Y,N,N) ************************************************** ********** Group 22. Monitor Print-Out IXMON = 16 ;IYMON = 15 ;IZMON = 6 NPRMON = 100000 NPRMNT = 1 TSTSWP = -1 ************************************************** ********** Group 23.Field Print-Out & Plot Control NPRINT = 100000 NTPRIN = 100000 ;ISTPRF = 1 ;ISTPRL = 10000 ISWPRF = 1 ;ISWPRL = 100000

No PATCHes used for this Group ************************************************** ********** Group 24. Dumps For Restarts NOWIPE = T IDISPA = 1 ;IDISPB = 0 ;IDISPC = 0 CSG1 ='M'

GVIEW(P,0.000000E+00,-1.000000E+00,0.000000E+00) GVIEW(UP,0.000000E+00,0.000000E+00,1.000000E+00)

> DOM, SIZE, 7.000000E-03, 2.000000E-03, 3.500000E-03
: DOM, MONIT, 5.425000E-03, 1.450000E-03, 9.350000E-04
: DOM, SCALE, 1.000000E+00, 1.000000E+00, 1.000000E+00
: DOM, SNAPSIZE, 1.000000E-02
: DOM, RELAX, 5.000000E-01

> OBJ1, NAME, B2
: OBJ1, POSITION, 5.000000E-04, 2.500000E-04, 1.700000E-03
: OBJ1, SIZE, 5.000000E-04, 1.500000E-03, 5.000000E-04
: OBJ1, CLIPART, cube4
: OBJ1, ROTATION24, 1
: OBJ1, TYPE, BLOCKAGE
: OBJ1, MATERIAL, 103
: OBJ1, TIME_LIMITS, ALWAYS_ACTIVE
: OBJ1, HEAT_FLUX, 0.000000E+00, 1.100000E+06

> OBJ2, NAME, PLATE1
: OBJ2, POSITION, 3.500000E-03, 0.000000E+00, 5.000000E-04
: OBJ2, SIZE, 5.000000E-04, 1.500000E-03, 2.000000E-04
: OBJ2, CLIPART, cube14
: OBJ2, ROTATION24, 1
: OBJ2, TYPE, BLOCKAGE
: OBJ2, MATERIAL, 111
: OBJ2, TIME_LIMITS, ALWAYS_ACTIVE
: OBJ2, ADIABATIC, 0.000000E+00, 0.000000E+00

> OBJ3, NAME, B4
: OBJ3, POSITION, 3.500000E-03, 0.000000E+00, 1.000000E-03
: OBJ3, SIZE, 5.000000E-04, 1.500000E-03, 2.000000E-04
: OBJ3, CLIPART, cube14
: OBJ3, ROTATION24, 1
: OBJ3, TYPE, BLOCKAGE
: OBJ3, MATERIAL, 111
: OBJ3, TIME_LIMITS, ALWAYS_ACTIVE
: OBJ3, ADIABATIC, 0.000000E+00, 0.000000E+00

> OBJ4, NAME, B5
: OBJ4, POSITION, 3.500000E-03, 0.000000E+00, 1.500000E-03
: OBJ4, SIZE, 5.000000E-04, 1.500000E-03, 2.000000E-04
: OBJ4, CLIPART, cube14
: OBJ4, ROTATION24, 1
: OBJ4, TYPE, BLOCKAGE
: OBJ4, MATERIAL, 111
: OBJ4, TIME_LIMITS, ALWAYS_ACTIVE
: OBJ4, ADIABATIC, 0.000000E+00, 0.000000E+00

> OBJ5, NAME, B6
: OBJ5, POSITION, 3.500000E-03, 0.000000E+00, 2.000000E-03
: OBJ5, SIZE, 5.000000E-04, 1.500000E-03, 2.000000E-04
: OBJ5, CLIPART, cube14
: OBJ5, ROTATION24, 1
: OBJ5, TYPE, BLOCKAGE
: OBJ5, MATERIAL, 111
: OBJ5, TIME_LIMITS, ALWAYS_ACTIVE
: OBJ5, ADIABATIC, 0.000000E+00, 0.000000E+00

> OBJ6, NAME, B7
: OBJ6, POSITION, 3.500000E-03, 0.000000E+00, 2.500000E-03
: OBJ6, SIZE, 5.000000E-04, 1.500000E-03, 2.000000E-04
: OBJ6, CLIPART, cube14
: OBJ6, ROTATION24, 1
: OBJ6, TYPE, BLOCKAGE
: OBJ6, MATERIAL, 111
: OBJ6, TIME_LIMITS, ALWAYS_ACTIVE
: OBJ6, ADIABATIC, 0.000000E+00, 0.000000E+00

> OBJ7, NAME, OUTLET
: OBJ7, POSITION, 7.000000E-03, 5.000000E-04, 0.000000E+00
: OBJ7, SIZE, 0.000000E+00, 1.000000E-03, 3.500000E-03
: OBJ7, CLIPART, cube12t
: OBJ7, ROTATION24, 1
: OBJ7, TYPE, OUTLET
: OBJ7, PRESSURE, 0.000000E+00
: OBJ7, TEMPERATURE, -1.026000E+04
: OBJ7, COEFFICIENT, 1.000000E+03
: OBJ7, TIME_LIMITS, ALWAYS_ACTIVE

> OBJ8, NAME, B8
: OBJ8, POSITION, 5.000000E-03, 5.000000E-04, 8.000000E-04
: OBJ8, SIZE, 7.000000E-04, 2.000000E-04, 3.500000E-04
: OBJ8, CLIPART, default
: OBJ8, ROTATION24, 1
: OBJ8, TYPE, PROBE
: OBJ8, TEMPERATURE, 0.000000E+00
: OBJ8, PRESSURE, 0.000000E+00
: OBJ8, VELOCITY, 0.000000E+00, 0.000000E+00, 0.000000E+00 STOP

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
must improve skewness ? mario FLUENT 4 January 31, 2007 10:10
How can CFD be used to improve race car? A Chu FLUENT 1 February 8, 2004 21:21
How to improve the accuracy of the CFX? Miko CFX 4 June 12, 2003 21:24
to improve convergence Mohamed FLUENT 0 May 14, 2003 05:43
How to improve y-velocity ravi FLUENT 2 March 28, 2003 09:01


All times are GMT -4. The time now is 00:26.