How to generate the grid for a 3d object?

March 20, 2002, 00:01

I want to simulation the pressure field of a roof in the flow field, but the shape of the roof is complex, I don't know how to generate the proper grid for it. In the phoenics applications album, I find a case which is very interesting, the path of the file is phoenics\D_POLIS\D_LECS\CAR\CAR.HTM, I'd like to know how the grid of the car is generated. Thank you.

March 20, 2002, 04:00

use ICEM CFD or GriGen, that's enough.

March 20, 2002, 06:59

Is it possible to load data files from Gridgen or ICEM into Phoenics? and how to do? Thank you.

March 20, 2002, 16:30

Ben,

Have read in POLIS about body fitted co-ordinates ? It basically allows you to place the grid on the blockage as opposed to in the domain.

Also have a read about the partial solids treatment feature, under the EDIT -> Domain -> Geometry menu. This feature allows phoenics to handle blockages, within the grid better.

I hope this helps.

Leon

March 20, 2002, 00:01	How to generate the grid for a 3d object?	#1
ben Guest Posts: n/a	I want to simulation the pressure field of a roof in the flow field, but the shape of the roof is complex, I don't know how to generate the proper grid for it. In the phoenics applications album, I find a case which is very interesting, the path of the file is phoenics\D_POLIS\D_LECS\CAR\CAR.HTM, I'd like to know how the grid of the car is generated. Thank you.

March 20, 2002, 04:00	Re: How to generate the grid for a 3d object?	#2
h.q.tang Guest Posts: n/a	use ICEM CFD or GriGen, that's enough.

March 20, 2002, 06:59	Re: How to generate the grid for a 3d object?	#3
Xiaofeng Li Guest Posts: n/a	Is it possible to load data files from Gridgen or ICEM into Phoenics? and how to do? Thank you.

March 20, 2002, 16:30	Re: How to generate the grid for a 3d object?	#4
leon Guest Posts: n/a	Ben, Have read in POLIS about body fitted co-ordinates ? It basically allows you to place the grid on the blockage as opposed to in the domain. Also have a read about the partial solids treatment feature, under the EDIT -> Domain -> Geometry menu. This feature allows phoenics to handle blockages, within the grid better. I hope this helps. Leon

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How can generate Uniform Cartesian grid?	Harry	Main CFD Forum	22	January 17, 2008 17:40
How to generate this grid???	leoyee	FLUENT	2	July 9, 2004 14:26
How to generate BFC grid?	zczhang	Phoenics	2	December 17, 2002 09:00
How to generate the Grid for a Blower Problem	Jaya- Athu	FLUENT	1	November 24, 2002 00:54
Can I insert an object before making grid in BFC?	ben	Phoenics	0	March 21, 2002 04:30