CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Phoenics

How to get "nett sources"?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 15, 2002, 03:42
Default How to get "nett sources"?
  #1
Marc
Guest
 
Posts: n/a
Hi, How can I get a nett source of a STORED variable in the result file. In my case its H1 I need to get a nett source for. Thx
  Reply With Quote

Old   April 24, 2002, 10:55
Default Re: How to get "nett sources"?
  #2
Jeremy Wu
Guest
 
Posts: n/a
Hi,

If you would like to know the nett source, you can set the source term through PATCH and COVAL commands in q1 file. Having made the calculation, you will find the nett source near the bottom of the result file where sources are listed for all the PATCHs.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
"""Source Term in UDS""" Sebeci FLUENT 6 April 16, 2003 12:46
Difference between "multicomponent" and "Homogeneo David George CFX 1 September 18, 2002 23:13
DIFFER IN "RESULT" AND "Q1" Baizhong Phoenics 1 December 9, 2001 10:41
"laminar" incomp. N-S eqs. for "turbulent" flows wowakai Main CFD Forum 4 November 27, 2001 06:48
what's the difference between "successive substitution" and "segregated" solutions?? wai Main CFD Forum 1 December 28, 1998 10:24


All times are GMT -4. The time now is 13:32.